I have a Nike Triax 35 and just had the battery replaced. Now there is no sound when the alarm goes off. The sound icon flashes but I can't hear anything. How do i get the sound back?

I had the same problem - replaced the battery of my Nike Triax Fury and the time was blinking and none of the buttons were working. Turns out that you need both springs placed in the proper spot - the silver and gold springs. Both springs can be placed in their proper spot with the batter in. The gold one goes in the tiny hole near the "view" spot, and the silver spring goes year the 'cage' that holds the battery in place accross from the gold spring. Unfortunately, I can't add a photo or I would. Good luck.

I had the same problem - replaced the battery of my Nike Triax Fury and the time was blinking and none of the buttons were working. Turns out that you need both springs placed in the proper spot - the silver and gold springs. Both springs can be placed in their proper spot with the batter in. The gold one goes in the tiny hole near the "view" spot, and the silver spring goes year the 'cage' that holds the battery in place accross from the gold spring. Good luck.

Nike Triax Fury 100 Super

You need to replace the battery. I had the same problem. Replaced the battery on mine and everything is fine now.

Nike Triax Fury 100 Super

You need to replace the battery. I had the same problem. Replaced the battery on mine and everything is fine now.

Where did you get the band?

Nike Triax Fury 100 Super

Yes you need to replace the battery. I had the same problem. Replaced the battery on mine and everything is fine now.

Log in to Nike website and click support button. You should be able to ask them how to obtain the part you are after.

You can't change it yourself without doing damage. You will need to send into Nike or more accurately an authorized nike watch repair center that is close to you hopefully.

Nike customer service or a google search for authorized nike watch repair in XXX-city will get one close to you.

Maybe you can use it on an armband like with an iPod. Even with velcro.

Press and hold in the mode button the seconds should start to flash.

Press top right button to select hour.

Press set button to advance hour.

Press top right button to select minutes.

Press set button to advance minutes.

Repeat this for the month/dte/dy/yr

Press mode button when done