The start button keeps blinking, WONT LET ME DO ANYTHING

How many times this standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/. If the blinks continues, and non-stop, the fault should be with its main system control IC, and with the memory IC.

Reseat the lamp again, and make sure that the lamp door is completly closed and screwed shut. There are safety switches that keep the set from turning on if all is not secure. If this does not help, you either bought a defective lamp, or your ballast is the problem.

this could be the power supply board

It might be the motherboard that needs to be replaced or the power button.

ok ,try cleaning the remote, first.open it up and clean it with alcohol and soft cloth.let it dry.then,assemble it.be sure your batteries are ok.

Test mode is Heated dry - Normal - Heated dry - Normal in 6 sec....

does it blink slowly or three time or fast or 7 times then repeat... let me know and I can help

maybe there is something wrong with your power supply.. i think you need to change it

I have the same problem EVERY time I want to use the crock pot. My solution has be patience. I find that if I turn it on, and the light blinks, but when i click it it will blink on 4 hours, then go back to the blinking light. By keeping the crock pot plugged in and off for about 10-15 minutes I was then able to set the crockpot up for cooking. As if the capacitors inside the unit needed power stored in them from the wall.

QuietGuard3: Clean light flashing 7 times? Press Heated Dry, press Normal Wash, then press Heated Dry again and press Normal Wash again (that's 4 button-presses) and that should fix it.