Question about Home Security

2 Answers

Blyss Wireless Doorbell need to re sync it but lost the instructions ...theres a Button on back of the sounder ..have tried various combos but nothing working !

Posted by on

  • 1 more comment 
  • Anonymous Aug 22, 2016

    There are only picture instructions but from what it implies:

    - remove all the batteries from the bell unit for at least 1 minute
    - ensure the battery in the doorbell unit is working and remove the back cover
    - replace the batteries in the bell unit
    - within 30 seconds of the bell unit sounding the bell, press the melody changer button on the back of the door bell unit

    that should pair the two

    - wait 1 minute before re-trying, removing the batteries from the bell unit first

    hope that helps

  • Anonymous Dec 15, 2017

    Neither answers on here worked for me. Paired mine by looking it up on you tube (instructions for Blyss doorbells come up as Byron).

    Put batteries in the bell sounder unit, it should chime when you put the last one in.

    Take a pen and depress the black button (marked L) on the back of the sounder unit until the sounder unit chimes, then remove the pen.

    press (but don't hold) the black button again once. The sounder should chime. if it does then it should be paired. check by pushing the push on the other unit.

  • Peter hanson
    Peter hanson May 25, 2018

    This does not work,

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

There are only picture instructions but from what it implies...

Reset the Unit

- remove all the batteries from the bell
- ensure the battery in the doorbell unit is working and remove the back cover
- replace the batteries in the bell unit
- within 30 seconds of the bell unit sounding the bell, press the melody changer button on the back of the door bell unit once
- remove all the batteries from the bell

Pair the Unit

- wait at least a minute after reset
- remove all the batteries from the bell
- replace the batteries in the bell unit
- within 30 seconds of the bell unit sounding the bell, press the door bell button

their helpline is: 0845 2301231

Posted on Aug 22, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Home Security Master
  • 12,962 Answers

Go to manufacturer web site for manual download.

Posted on Oct 23, 2015

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

miroypianole
  • 6 Answers

SOURCE: A doorbell with a mind of its own?

replace the button switch

Posted on Nov 13, 2009

uhclem2k
  • 7 Answers

SOURCE: Trying to reset the code for my DESA wireless

It would appear that there are pins in both the ringer and door button and you have to change them so they match. To remove the door button, slide the case straight up slightly (maybe 1/8 inch). Pry the top of the case away from its base and slide down to remove the entire button assembly. The pins are inside, next to the battery. 5/6/7 seems to be the default, so any other combination of three pins should solve your neighborhood conflict. (Don't use pin 8. That one changes the ring from a two-tone chime to a 16-note sequence.)

Posted on Mar 04, 2010

  • 10 Answers

SOURCE: how do I change the battery in the wireless doorbell button?

in the wireless doorbell button, you can plug out the old battery, and then plug into the new one, be careful, new one should be the same type as the old one, try it , good luck!

Posted on Feb 23, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I open the doorbell push to fit new battery?


the front just pops off using a small screw driver

Oct 24, 2018 | New Home Security

1 Answer

My new wireless plug in Blyss doorbell may be setting off my house alarm,is this likely?


No as the not at all the rf output runs on a different frequencies

Jan 16, 2017 | New Home Security

2 Answers

How to change chime on a blyss DC3-UK-WH


I couldn't find the manual instructions for your Blyss MP3 wireless door bell... I asked your question on the UK Amazon store that sells that unit, but who knows when or if anyone will answer it
Blyss Wirefree battery door bell with additional plug in bell

I found a similar manufacturer's MP3 wireless door bell.. you might find some idea from that if it might be similar or the same ??
http://www.deurbel-zaak.nl/Files/2/24000/24385/Attachments/Product/j0vB6W640153772PG8ZrR6gr9Xr1363i.pdf

Besides that, you have listed this question in the wrong category. The below linked section may have others that are more qualified that might be able to answer your question who are more familiar with your product:
Questions Answers for pair blyss wireless doorbell

>> If this was helpful in any way, please let me know so that I will continue helping others, by Clicking on the Helpful button below. Thank you :)

.

Dec 04, 2015 | Cell Phones

1 Answer

Id like to change song on my doorbell Dimango model 4330 r cd chime reciever


The webpage http://www.dimango.com/dc-cd-quality-doorbells.htm

shows:

Wireless Doorbell CD Quality Door Chime
Model RC4300

No longer do you need a wired door chime or traditional doorbell with brass tubing to get amazing, rich sound. Our Battery Operated Door Chime from Dimango has CD quality sound while remaining completely wireless...







  • Plays three selectable sounds



    1. Ding Dong


    2. Dong


    3. Westminster Chime Click To Hear Sound!




  • Set sound conveniently at button




It seems that there is a button on the receiver/speaker. Try press once and see if the sound changes.

Nov 27, 2013 | Desa International White Wireless Plug In...

3 Answers

Hello I have now got 2 (two) of these units over the past 8 months and neither work----changed batteries--interchanged push button---changed main unit--nothing works----but when my neigbour across road has...


The doorbell buttons and your receiver must be on the same channel. If you will get out the directions that came with your unit, they will describe the process to go through to reset the specific "codes" for your buttons and receiver.

Jan 04, 2010 | Desa International White Wireless Plug In...

2 Answers

Doorbell frequencies.


Check the reciever (ringer) as well, it will have to be set to match what you do to the transmitter (the doorbell button)

Jan 12, 2008 | Computers & Internet

Not finding what you are looking for?
Home Security Logo

Related Topics:

17,017 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Security Experts

Brad Brown

Level 3 Expert

18031 Answers

Marvin
Marvin

Level 3 Expert

84565 Answers

Lawrence Oravetz

Level 3 Expert

10528 Answers

Are you a Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...