My drive is not detecting in my PC or others

Guessing, but it sounds like your hard drive has been damaged. You may need a new drive, or at least repairs. If you have a "rescue disk", give that a try.

Media test failure usually means the hard diskhas failed or the hard disk needs re-seating or the disk controller is faulty.First - re-seat the harddisk and reboot the computer. If the computer does not boot up then reboot andgo into the BIOS configuration to see if the BIOS detects the hard drive. If itdoesn't detect the hard drive then it could be faulty.
Then the hard drive needsto be replaced in the computer/laptop, Windows installed and the computer orlaptop's device drivers plus your programs etc. to get a functioningcomputer/laptop again.

HI FRIEND

Is your Pen drive plat with other PC

if yes than instal play and plug 2.0 software in window 7 PC

OK

we need to know if the problem comes from the pc or the usb... first remove the usb from pc, restart pc, then insert usb again. if it doesnt work, try to use other USB and see if your pc can detect it. 2) try if the usb can be detected on other pc, if its not working on other pc, then try to return to supplier/seller if it still have warranty or get a new one.

please check it in different CD or DVD. then check it in a another cd drive attaching to ur laptop. otherwise format your laptop it may be infected with some virus

hi
long sound or beep is produced due to incorrect insertion oh ram
try to insert ram properly

Just plug the drive into your USB port, Windows will detect it and install the software.
Open Windows Explorer and you will see it listed as a removable device. It will probably need to be formatted first, but Windows will advise if this is needed.
After that, you can use it like it was a hard drive, just copy and paste files to it.

On opening my pen drive it displays "Pl insert a disk in drive G

It will recognized if you select it manually: when prompt what DigiCamcorder INSERT the CD installer of your camcorder to detect your unit in the firewire.

try to manage it with the software which came with your cam