Tv will not pull up setup screen just keeps changing colors

your TV is in test mode , Google your TV model number and the word test mode or let me know your model number to help you out bostonrecycling.net

my is doing the same did you fix it

The tv colors wheel is dying,replaced the tv colors wheel,will solved this problems.Hire a tv Tech.to change the tv colors wheel,it pretty hard to change the colors wheel in this tv.Because u require take out many machanical parts before u even can come to the tv colors wheel itself to change it.

That colors are a self test to check the pixels on the screen surface. If after the colors the TV works fine is OK. Go in the TV options and disable Self Test or LCD test.
If the TV keeps switching colors you should take it to service because is asking for service.

Could be?Might not,these are very common problems on DLP tvs convergence board are dead.The tv have convergence problems,it dead.The tv convergence board require the 2 STK convergence ICS and some or all it resistors are dead.These parts require changing,to solved convergence problems.The shop will $300-350 for parts and labors.

Similar to mine, only my tv you can change channels. We either need someones help or atleast a service manual (not user manual)

go into menu, look for picture or setup mode. in setup look for chroma/color & tint/tone controls. you should be able to adjust to personal preferences. one other setting, is the color temp setting. this will allow you to change to warmer back wash. hope this helps because the Bravia is a good set

good day,

what video device do you plug in to your TV screen, DVD player/VCR or game console?

If you still have the owners manual of your TV screen, look for instruction regarding Color system or video system. this menu will allow you to change color sytem from PAL to NTSC or AUTO system.
most likely the reason why you have a black and white color from vidoe input is because of system color compatibilty from your input device to your screen.

Or if your using a dvd player, you can also try accessing the "setup" button and look for video setting. from the video setting there will be selection to choose from: PAL , NTSC, AUTO . always select "auto"
so that the color system of your DVD player can change from PAL to NTSC deffending on your TV screen system setup.

cheers,
mark

siri,

for the black and white screen output of your DVD and VCR.

1) for DVD player: using remote control locate "setup" button and click.a dialogue box should appear indicating " audio setup" video setup" etc.....
2) select and scroll to "video setup". in video setup there should be an option to choose "AUTO" "PAL" or "NTSC"
3) choose "auto" then check if any change in screen color.

for VCR, locate a switch or button indicating "PAL" "Auto""PAL SECAM" "NTSC". same with the dvd choose and select "auto"

note: if you still have the manual for both VCR and DVD check the instruction with regards to video color setting.

cheers,
mark

okay I just got mine to work. All I did was: click menu on my remote control, go to setup, go to the very bottom where it says "Default" and press ok on the remote. Everything went back to the default settings and worked.

If the audio still doesnt work, go to menu, audio tab, down to MTS system and hit right or left on the remote to change the audio setup.