Epson Stylus shows out of ink with full cartridge

Try a Reset. It sounds like it is confused!

https://www.google.com/search?q=Epson+D92+printer+reset

..

Hi,

Old Epson printer has an ink button usually located on the front panel, it will look like a tear drop. Press and release the button and the cartridge holder should go to a position where you can replace the Ink. You may need to press and release the button several times since Epson has a feature of detecting which ink is empty. Hope this helps.

Basti

Are they "original" Epson ink-cartridges, or have they been refilled? Often, the refilled cartridges will show as "empty", but they work, until they _do_ get empty.

Found this on the web. You can download the entire
manual if you like. If you find this helpful, pls rate me.
ftp://download.epson-europe.com/pub/download/3233/epson323393eu.pdf

Hi Freind You Can go to the link I am pasting which will guide you to change your Ink Cartridges
http://support.epson-europe.com/onlineguides/en/d92/html/ink_4.htm

FTB

Are you using genuine epson cartridges? Many generics simply dont work on the newer printers. Once the printer decides the cartridge is empty, it sends a signal to the chip and that's it. You might hear ink, but if the chip says empty you can't use it. It also has the annoying habit of doing this when there's still 10-15% of the ink left.
I use reusable cartridges from http://www.ccs-digital.com They hold 2/3 more ink and the chips automatically reset to full if you remove and re-insert the cartridge. Instead of replacing the entire cartridge when it's empty, you pop out an internal ink tank and replace just that. So you know the chip has already been recognized by your printer. The ink tanks cost under $3. I think these are a brilliant invention.

hello
Download the the driver again and reinstall it.
http://esupport.epson-europe.com/ProductHome.aspx?lng=en-GB&data=wsMoc1iChVGcisk9ncQeIBmTUU002FxOg74o84TjGD6F5MAU003D&tc=6

you can buy an epson chip resetter. i think they 7pin chips .try ebay about a fiver.it should reset the chips.the cart that is empty use your restetter on that and put that chip on the one that doesnt work.should be ok then.resetter led nornally goes green if chip is reset.ink level goes up to full.when carts show empty reset and you should be able to keep printing a few more pages.check chip contacts are clean no dirt etc.try resetter on non working cart light should go green.hope this helps

IT IS POSSABLE THAT THE PRINT HEAD ARE DIRTY THEY HAHVE MATCHING BOARDS TO THE TONER CARTRIDGE BOARDS UNPLUG THE MACHINE AND CLEAN THE PRINT HEAD WITH ALCOHOL IF IT DOESN'T WORK THE BOARDS HAVE FAILED

JP

Check the following thread, it might apply to your problem. and just as a printer can be fooled to show a low level ink, I guess it can happen the other way around. http://www.fixya.com/problems-solutions/t103191,p342983/Epson-Stylus-Photo-R300-InkJet-Printer.aspx Good luck