Can you diagnose the fault & advise me how to fix my hotpoint electric cooker please?

If you have a problem with your hotpoint cooker or oven then this diagnostic video will help you find the fault and i hope it helps you. i have put a link also so you can get the parts for your cooker

cooker parts
Need help fixing your appliances

these repair guides will also help you find and understand the exact problem with your cooker

How to Repair

and if we really helped you you could always buy us a beer
Buy Paul Beer

Good Morning Friend,

I understand you were using the stovetop and oven on your Electrolux range. You heard a loud pop, and are wondering what happened. I suggest contacting your local authorized dealer for further assistance. They have been trained on your appliance and should be able diagnose your appliance and determine what cause that loud pop.

-Best Regards-
WP

If you have a problem with your cooker or oven then this diagnostic video will help you find the fault on your beko oven and i hope it helps you. i have put a link also so you can get the parts for your cooker

cooker parts
Need help fixing your appliances

these repair guides will also help you find and understand the exact problem with your cooker

How to Repair

and if we really helped you you could always buy us a beer
Buy Paul Beer

Is there a black pole sticking out that goes in when you close the door, my Hotpoint freestanding cooker has it on the right hand side, once this is pressed in the fan and heat starts, i had to replace it on my cooker as it went faulty and stopped things working (all I had was the main oven light on, these are usually like a little black box that are situated on the side of the oven just behind the main metal panel on the outside and will normally have 2 pull off spade connectors connected to it.
i don't have the same model as you but hopefully this mig help you.

Hello,
Is the model number correct. ZBF360X.
Anyway the error code fo8 normally relates to a faulty Tangential Fan.(Cooling Fan),which can be found on teh top of the cooker behind the control panel and it is there to cool said panel.

Hope this helps.

If the fan is working o/k, then it is probably a faulty heater element.
This is located at the rear of the oven behind a removeable cover.
Please rate my solution.
Thankyou.

if this happens on the fan oven replaced the element

You need to replace the element. Very easy job remove the back plate from inside the oven (4 screws) and you will see a circular element held in place by one screw in the centre of the fixing plate. Remove the fixing screw then remove two wires and refit new element job done.
Regards Neville

a bit more info please, electric or gas, fanned or coventional.

The POP sound normally indicates a short circuit fault (as opposed to overload) you need to have it looked at by a competent person.