E5 show on my screen cannot sew keep on peeping

TAKE IT TO A LOCAL REPAIR SHOP

Search for:

Make Model error code

Singer 5400 error code E5

Same machine and model and same problem. It’s really irritating. It’s not the bobbin as the screen flashes worth the foot pedal. I’ll look at the tension but given how often it beeps and on so many different projects with different thread and tension it seems to be a fault of some kind... searching for a fix...

http://janome.com/siteassets/support/manuals/computer-models/inst-book-2030dc--jnh1860-en-.pdf

The above may well be the manual you have. The peep peep peep is listed at the end of the manual. Sadly, it simply mentions invalid operation. That said, below is a service manual that does include this mode (although at first glance it may appear otherwise)

https://www.craftsy.com/blog/2014/11/how-do-i-fix-my-sewing-machine/

This last link just might prove helpful.






How Do Fix My Sewing Machine Troubleshooting Your Janome

it is some type of error message go to your manual it should tell you whats wrong look under messages

Look in you manual under messages it is some type of error message

Could the code be C5. In the manual on page 29 is an explanation of what the codes mean.

Nothing you can do yourself.

The start/stop button was pressed while the foot controller
was connected.

Disconnect the foot controller,

and then press the start/

stop button. Otherwise,

operate the machine by
using the foot controller.
Hope this helps.