What's the welcome view for guest? - Canon PosterArtist 2008

Open Cisco Connect then click Guest access. The password is displayed under the Password header.

To go to the Guest access option using Cisco Connect, follow the steps below:

Step 1: Select Guest access at the main screen of Cisco Connect

In the Guests access settings window, you can enable or disable the Allow guest access, change and check the password for the guest network, or change the number of Total guests allowed.

NOTE: The Guest network name is the main network's SSID with -guest as a suffix. If you want to change the guest network's name, you will need to change the main network's SSID.

Click on Start
Click on Control Panel
Make sure Classic View is Selected
Click on User Accounts
Click on Manage another account
Click on Turn off the Guest account
The next screen should show the Guest account is turned off.

If this guest account is not yours and there is not items being purchased and you being billed for them ,then you don`t really have to worry about it. If you want an eBay account of your own just click ''sign up'' instead of ""sign in'' and use a different eMail address. You can have more than one eBay account by using a different eMail address.

check out my eBay store

Logon screen will only show if you have multiple users or a password setup. Setup in Control Panel > Users. Enable the Guest account.

Welcome to Fixya

Try to restore the printer to factory state and make sure you record your printer's settings before performing this procedure. Holding down the printer's Green print button briefly will print any configuration information.

a. Turn the printer power off
b. Press and "hold" the green "go" button whilst turning the printer on.
c. Continue to hold the go button for at least 5 seconds and until the amber
attention light turns on (triangle with ! in the middle), this should occur
before 15 seconds elapses.
d. Release the go button.

Your response will be highly appreciated.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

If you set the guest monitor to a resolution higher than the machine supports, full screen switch mode does not work properly in the full screen player (vmware-fullscreen.exe). In some cases this can cause the guest operating system to hang.
This problem occur only in vmware-fullscreen.exe. The problem does not occur when you set a virtual machine to full screen view in the Workstation user interface you see a message advising you to reduce your guest's resolution or color depth and try again.

Start
Control Panel
User Accounts
Change way user logs on and off
Uncheck "Use Welcome Screen''
Hit apply options
Make sure only 1 account is on
Make sure guest account is off

Hi Guest!
Try pressing the keys Control, Alt, down arrow. Then try the Control, Alt, up arrow. This flips the image on a lot of Nvidia cards. Good Luck.