Assemble a Craftsman 316.79186 weed wacker after replacing ACL Lever

Video links at the bottom of this feedback.
Turn Off the Ignition: Move the ignition switch on the Craftsman trimmer into the "Off" position.
Remove the Starter Assembly Cover: Use a screwdriver to unscrew the starter assembly cover and remove it from the trimmer.
Prepare the New Pull Cord: Cut off the old cord from both the pulley and the starter handle. Dispose of the old cord.
Replace the Pull Cord: Flip the starter cover over and replace the pull cord. Make sure it's securely attached to the pulley.
Reassemble the Starter Assembly: Put the starter assembly cover back in place and secure it with the screws. How to Replace the Pull Cord on a Craftsman Weed Trimmer (youtube.com)

WS 2400 (CMXGTAMDSS27) (41ADSS27793) - Craftsman String Trimmer Parts Lookup with Diagrams ' PartsTree

http://www.barrettsmallengine.com/partslist/poulanproppb330trimmer.pdf

hope this is helpful and the right model

#34 craftsman weed wacker manual

45.55.157.141/craftsman-weed-wacker-manual.html
100+ items - pdf download about #34 craftsman weed wacker manual ... Books Title
File Code
Craftsman Weedwacker Manual from Sears com
Free Craftsman Trimmer User Manuals ManualsOnline com

If you go to searsparts.com and put in your model number it will show you a drawing of your weed wacker. Not sure of what you are looking for. Hope this helps.

Replace head gear box.

http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Grass-trimmer-weed-wacker-Parts/Model-316795001/0247/1503820/P0090470/00002

The parts diagram above shows part #25, that part located just behind the head should have a small hole in the side about 1/4" diameter. That hole lines up with another hole inside to stop the shaft from turning . You need to line up both holes visually then insert a small phillips screwdriver in through both holes, that will hold the shaft still while you turn the whole head assembly with your hand. When removing the head assembly it should turn counter clock wise,when looking at it from an operating position, meaning that the threads are left handed.

Looks like you've possibly referenced the wrong model # for your trimmer. There is a diagram available for model 358.791520, but not a 356.791520. You can find it here - http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Grass-trimmer-weed-wacker-Parts/Model-358791520/0247/1503820?searchedModel=791520&blt=11.

Once you get the Sears numbers for parts you need, you can find replacements for them at HyperParts.com's cross-referencing page here.

You should be able to find a diagram for your model here - http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Grass-trimmer-weed-wacker-Parts/Model-316798221/0247/1503820?pathTaken.

it could still have the broken peice from the old one inside the seat.take it apart and look inside and inspect the seat where the drive cable enters.

I have a 32cc craftsman model # 358.791070- looking for the fuel diagram. please help!