Hi I am from New York, my autorefractometer screen displaying massage "time clock battery ng". Anybody knows where is the battery located and how i can change it?

Step 1 Locate the "Clock" button on the display. The display is located above the oven door. It clearly shows the time and has settings for temperature, time and cooking.
Step 2 Press and hold the "Clock" button until the time starts to blink.
Step 3 Set the time with the number pad. Ignore the colons and enter the number straight through. For example, if the current time is 10:08, just type 1-0-0-8.
Step 4 Set AM and PM by pressing the "#" button. Press "Start" to finish.

Treadmill Maintenance How To Lubricate Treadmill Belt LED Blink Patterns on the Control Board Treadmill
Follow this steps carefully, in order to fix it.
If the problem persist, time to REPLACE the Controller board motor., by new one or Rebuilt.
Blessing.
[email protected]
cell+whatsAPP:+50588611441

In Map view tap anywhere near the center of the screen. A new screen is displayed. On that screen locate the Change Preferences icon, tap it. Press the right pointing arrow (may have to tap 6 or 7 times) until you find the time and Date icon. Tap it and configure. You can set the clock manually or let it synchronize itself with the GPS signal.

This sounds to me like a lens problem and your camera would need to be serviced. If you're in the East Coast or New York City area give us a call and we'll see what we can do for you. Hope this helps!

Hiram
Photo Tech Repair Service
110 East 13th Street
New York, NY 10003
212-673-8400

Hi lufberg,

I see you need help with your radio controlled clock.

Place your Seth Thomas atomic clock face-down on a table or desk and locate a series of buttons labeled "PST," "MST," "CST" and "EST" on the back of the clock. Press the appropriate button to set the time zone.

Turn your attention to the small lithium battery-powered digital clock display on the back of your clock. With the correct time zone set, the digital display should accurately reflect the current local time.

Locate the AA battery compartment on the back of your clock. Put two new AA batteries into your clock's battery compartment.

Set the "Mode" switch on the back of your Seth Thomas atomic clock to "Run." Wait for it to adjust to the correct time. The automatic time-adjustment process can take up to 45 minutes, but is usually completed much sooner.
Read more: How to Set a Seth Thomas Atomic Clock ' eHow.com http://www.ehow.com/how_6120534_set-seth-thomas-atomic-clock.html#ixzz1REo5s6T9

I hope this will help.

Thank you for choosing Fixya,

mvincentc

Hi lou4406,
you may wanna call Acer Customer Service at this number 800-816-2237 or 866-621-2237 for the service.. Hours of Operation: 8am-5pm CST
i found a repair facility in washington as follows
Embassy Service Center - www.embassy.org - 2202 P Street Northwest, Washington D.C. - (202) 659-8562
Computer Clinic CENTER - www.cccits.com - 4433 Wisconsin Avenue Northwest, Washington D.C. - (202) 362-9702
Earl's Discount Auto Parts & Repair Center - 3 - 2901 Minnesota Avenue Southeast, Washington D.C. - (202) 582-1301
Goodyear Auto Service Center - Paahina ng Place www.goodyearautoservice.com - 3156 Bladensburg Road NE, Washington - (202) 526-3885
Embassy Sunoco Services Center - 2200 P Street Northwest, Washington D.C. - (202) 659-8560
Nova Service Center - Paahina ng Place www.novaservicecenter.com - 5039 Connecticut Ave, Washington D.C. - (202) 338-2915
Capital Service Center - 1911 New York Ave NE # A, Washington D.C. - (202) 526-9000

Place your Seth Thomas atomic clock face-down on a table or desk and locate a series of buttons labeled "PST," "MST," "CST" and "EST" on the back of the clock. Press the appropriate button to set the time zone.

2

Turn your attention to the small lithium battery-powered digital clock display on the back of your clock. With the correct time zone set, the digital display should accurately reflect the current local time.

3

Locate the AA battery compartment on the back of your clock. Put two new AA batteries into your clock's battery compartment.

4

Set the "Mode" switch on the back of your Seth Thomas atomic clock to "Run." Wait for it to adjust to the correct time. The automatic time-adjustment process can take up to 45 minutes, but is usually completed much sooner.

Read more: How to Set a Seth Thomas Atomic Clock ' eHow.com http://www.ehow.com/how_6120534_set-seth-thomas-atomic-clock.html#ixzz1GyAcVHP2 hope this helps you

Hi, it's simple. First press "Timer1" and Timer2" buttons together, clock on display will start blinking, by cursors "Up/Down" you can change the value of hours and minutes (switching between hours/minutes by "Left/Right" cursor). To save set time press "Memory". Enjoy your set clock :)