Model DHF2260. Are parts still available? - Fedders Dehumidifiers

If it's just the fan blade # CRCFD5303-010, you're in luck. It's available from the following link.
http://www.appliancefactoryparts.com/search/partinfo.php?partsID=281964&modelsID=114658

If it's the fan motor you're after. They are no longer available. As Fedders has been out of business for several years and many of the parts are no longer available.

I hope this helped you and thanks for choosing FixYa.

The model you have was made for Maytag by Fedders. Unfortunately, Fedders as you knew them, when you purchased the unit, is no longer in business.

The part you need to replace is CRCFD2518-020- Pc board w/auto restart dehumidify and with anti-icing thermostat (defrost thermostat). this unit also include the humidistat control. However, that part is no longer available and there are no substitutions for that part.

Don't feel bad. This part was also used by many other name brand manufacturers and is no longer available for their dehumidifiers ether.

I'm really sorry, I wish I had better news for you.

Although Fedders, as you knew it is no longer in business, some parts are still available.

Here is a link, with an explodes view of your model's parts.Locate th epart you need and then enter the part number, to see if it's still available. FYI Maytag Dehumidifier parts are interchangeable with Fedders. Fedders made the units for Maytag.

http://www.appliancefactoryparts.com/dehumidifiers/fedders/a7dh45b2a.html

I hope this helps you find what you need.

You can find what you're looking for at Appliance Factory Parts Just look through the parts available for your model.

http://www.appliancefactoryparts.com/dehumidifiers/danby/danby-motors-and-blades.html

Without a Model Number or Part Number it's hard to help you. But here are three links, where you can find the float switch, if it's still available. You'll definitely need the Model Number to find anything.

http://www.apwagner.com/index.php?main_page=page&id=148

http://www.appliancepartspros.com/crosley-dehumidifier-parts.aspx

http://www.partselect.com/Entry.aspx?Source=GAWS&Brand=Crosley&Term=crosley+dehumidifier+parts&gclid=CIzJ3ZvR4KgCFcV95Qodnh3C0g

Hope this helepd you. Please let me know. Thanks.

I think what you're looking for is the bucket or tank assembly that has the float valve in it, rather than the tray. In any event, there are not many parts still available for this unit, as it has been discontinued by Fedders. However, they did make the identical unit for Maytag & Whirlpool and you may be able to find interchangeable parts from them.

In the meantime, here is a link to some Fedder's parts that are still available for your model.Which may be helpful in cross referencing the Maytag & Whirlpool models.

http://www.appliancefactoryparts.com/dehumidifiers/fedders/a7dh45b2a-a.html

Sears Parts Central may be another good source.

Hope this information has helped steer you in the right direction.

With most portable dehumidifiers, a hose can be attached to the collection bucket by either removing a cap, or drilling a hole into the hose fitting. If this does not work for your specific model, Searspartsdirect.com or repairclinic.com might have the part that you need. Hope this helps.

For model M7DH45B2A Maytag 45 PINT Dehumidifiers
Parts for the unit. www.appliancefactoryparts.com
Part CRCFD5303-010 Fan - $19.99
Part CRCFD3000-030 Motor - $49.99

Parts for others are also available.

What is the model # from the sticker on the unit? I'll see if I can help.

Looks like a control board, Check the board for burn marks. What model do you have? Some parts are available on-line at appliance factory parts.. also check your Capacitor and fan motor before you install your new Board..Let me know if this helps? Krazytech