My cd/dvd player doesn;t play nor will it eject but evrything elsel on radio works

Alien is right, pull the Radio Fuse, then put it back in and eject the CD/DVD. Happens to me sometimes with burned DVDs, seems like the player is picky on the CD/DVD media. Rebooting the device (by pulling the fuse) is the only way to eject it.

Dixit

There is a chance that you have a bad drive belt inside of the CD player. You probably need to have the unit removed and either sent in for repairs or find someone local to you that is competent in repairing it.

you can look for a radio shop to repair the cd player it would be cheaper to install a aftermarket radio they do have kits if you have steering wheel controls

HI lisasmith566 IT is not a fuse problem .
the problem is your the CD part of the radio
must likely the cd is stock or more likely the cd drive motor is defective .
FIRST try pushing eject on radio and see CD comes out if not you need a new radio .

good luck vote

98 T&C Chrysler /CD Problem Player Error ????

my dvd player wont work

Turn the radio off first and then disconnect the battery for 2 min then reconnect the battery. This should reset your radio and then you can eject your CD, and reset your stations and clock. Good luck

can u give me some info about how to identify the power supply wire to a car cd player

My first question is: Has it ever played CDs? If not, it try using factor CD's and NOT Burnt ones.
I also recommend taking the cover off the player and use rubbing alcohol and a cotton swab and clean the glass laser eye. They tend not to read when they are dusting.

If the player is going to work, it will after the suggestions I just made. Otherwise the laser or laser motor may be faulty.