Voyager Legend. Why isn't it working? - Plantronics Explorer 220 Bluetooth Headset Wireless Headset

https://www.plantronics.com/hk/en/support/knowledge-base/kb-article-page?type=How_To__kav&lang=en_US&urlName=Voyager-Legend-How-to-Pair&t=All&k=

See above link for pairing instructions.

Click on
https://www2.plantronics.com/media/media-resources/literature/cordless_mobile/voyager-legend_ug_en-us.pdf

you may need to replace the battery

This is a suggestion. Go to settings on your phone, click on Bluetooth, if you're using the Legend at this time, click on legend. You should show two profiles, call audio and media audio, turn off media audio by removing the checkmark in the box. Hope this helps.

When I turn on My voyager legend it says in English voice function switch then it repeats in in another language. What does this mean and how can I fix it. Also won't pair to any device I have.

www.plantronics.com/us/product/voyager-legend

That happened to me, the charger was not really charging so they sent me a new one and it perked right up

I just had this happen to me. Like yours mine just kept buzzing and the on and off switch had no effect. It just kept buzzing.

The way I was able to fix it was to reset the device by holding both the mute button and the call pick up button until the buzzing stopped. It took only 3 seconds to fix and it immediately began to work. When I switched it on the buzzing was gone and it was working again.

I hope this helps anyone as I didn't see and answer to this issue online anywhere and had to figure it out myself. Take care.

Yes - there's a "flick" switch on the back of the headset with a + and - indicator. Simply flick this upwards to increase the volume, or downwards to decrease the volume.

You will need to take the unit apart and useing a wire clear the jets in the throught then flush with good pressure water. Check your filter to see if it is passing derbs. Also check your finger screen at the wall in the hose connection.