Big Buck Hunter wont show the target all i get is no signal.

If your game has a CRT monitor you will have to stay with a CRT. You can get a great picture from an LCD or LED unit but the guns won't work.

after open the gun check also the coil or coils in the target if it is open your gun will no work even if the switch's work properly

What???

I too am having the same prob. returned the first one back to cabelas brought home a new plug and play, it lasted all of 22 mins before it started freezing. will never buy another one.

I'm having the same problem. I found that if I put the LED box on TOP of the TV, it will recognize the first target, but not the second or subsequent targets.
It looks to me like this will only work with a smaller TV. The angles seem too large on a big screen TV. I've contacted the manufacturer to see if my guess is right.

Me too! Can't find one, though.

Press the test switch inside the coin door. This gives access to the operator menus. Use the start buttons, gun triggers and gun pump handles to move through the menus and select options. It's pretty intuitive once you get in there. First thing is to calibrate the guns, which the game leads you through once you access the relevant menu option.

I am an amusement arcade game technician. I have found that the Big Buck Hunter Pro arcade games that use DELL pc's are fine, but the ones that use the "generic" pc inside have a tendency to overheat, causing capacitors to fail on the motherboard. You need to replace the caps , or get another motherboard.

just curious if you still have that broken gun? I am a sculptor in MN and making a piece that i wanted to put a lazor into a broken big buck hunter gun to shoot up at a sensor on a deer which would make it wink at you. thats the plan atleast trying to find a gun. thanks kari