Make sure the Lamp door is tight. Unplug the TV, and remove the lamp and then reinstall the lamp making sure the door is tight. Then plug the TV in and try again. If it does not work, please post the model # of the TV.
no it is still not working the model number is this may also means something buttons on the remote controlI also blinking from time to time
model numberPT-52LCX65
It is starting to sound like it might be a fan. However, there is something you can look at. Here is the manual for the TV. Please look at page 65 and see what the indicators lights are telling you. The lights will flash in a certain pattern. We need to know that pattern
http://service.us.panasonic.com/OPERMANP...
×
SOURCE: Blinking Green Light on Mitsubishi DLP 52525
No problem, do self diagnosis test, read threads here or goto ctechnicians.com get error codes first and get back with me.
SOURCE: Hitachi 55VG825 rear proj television blinking light and screen doesn't light up
Refer to owners manual ! Blinking indicates the type of fault that is occuring on all your tv sets. example : power light on red - indicator light beside it green but blinks rapidly for half a second rapidly then shuts off. This refers to a faulty lamp or a lamp that is near its expiration. Read your manuals if indicators refer to easy repair sweet, but if it says call tech then bummer...
SOURCE: power was off
You need to replace 4 capacitors on the DM board. It is located inside a metal box on the left side of the set, looking from the rear. The original parts are 1000uf 16v. You will need to install 1000uf 25v or 35v. They are located at the top of the board and are green colored.
SOURCE: projection lamp timer reset
The others are almost right. You first hold down the minus button on your "TV", then at the same time hold down 0 on your remote. Make sure if you have a universal remote to swich it to TV.
SOURCE: How do we reset the lamp timer?
Try holding down VOL - on the TV panel and then hold SPLIT or PIP on the remote for 5 seconds. A message should appear saying it is reset. I hope this helps.
" from the menu options displayed on the screen. Press the "Exit" button on your remote control and turn off the television.
to reset the lamp timer.
206 views
Usually answered in minutes!
×