Unit is making a grinding/rattling sound on and off with more use. How do I fix this?

If its shakeing and makes that sound , it over heated

Hi, Anonymous I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.

1. Bearings---SCREECH---WHINE

2. Belts---CHIRP

3. Brake Rotors---BUZZ

4. Cam Chains---CLICK

5. Clutches---CHATTER---GRIND

6. Cylinders---PING

7. Fairing Panels---WHISTLE

8. Fenders---SCRAPE

9. Flasher Unit---Beeps

10. Fronk Forks---Plunk

11. Fuel pumps---WHIRR

12. Gears---WHINE

13. Head Gasket---HISS

14. Hydraulic Lifters---TAP

15. Instrument Clusters---BUZZING

16. Kick Starter---GRINDS

17. Pistons---SLAP

18. Power Valves---CLINK---RATTLE

19. Radiators---GURGLE

20. Rear Chains---RATTLE

21. Rear Shocks---SQUEAK

22. Relays---CLICK---BUZZ

23. Rods Go---KNOCK-KNOCK

24. Shaft Drives---WHIRR

25. Shifting Trans---CLUNK

26. Solid Lifters---TICK

27. Speedometers---bzzz

28. Starters---CLICK

29. Starter Clutch---GRIND---WHIRR

30. Warning Lights---BEEP

For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below.Good luck and have a wonderful day.

https://www.hdforums.com/how-tos/a/harley-davidson-dyna-glide-engine-noise-diagnostic-guide-413949

http://www.mediafire.com/file/g3h2vn0nvw3b5wb/2001_Harley_Dyna_Service_Manual.pdf/file

https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc

https://serviceinfo.harley-davidson.com/sip/service/document/6300

https://www.6ya.com/ to speak to me personally

sounds like a wheel bearing,one piece hub and bearing,not a hard fix ,bearing is like 100 bucks tho. Don't let it get worse,the wheel could lock up

Will need additional information to be useful:
Year, make, model, engine size, miles on vehicle, etc.

Hi, Paul, I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.

1. Bearings---SCREECH---WHINE

2. Belts---CHIRP

3. Brake Rotors---BUZZ

4. Cam Chains---CLICK

5. Clutches---CHATTER---GRIND

6. Cylinders---PING

7. Fairing Panels---WHISTLE

8. Fenders---SCRAPE

9. Flasher Unit---Beeps

10. Fronk Forks---Plunk

11. Fuel pumps---WHIRR

12. Gears---WHINE

13. Head Gasket---HISS

14. Hydraulic Lifters---TAP

15. Instrument Clusters---BUZZING

16. Kick Starter---GRINDS

17. Pistons---SLAP

18. Power Valves---CLINK---RATTLE

19. Radiators---GURGLE

20. Rear Chains---RATTLE

21. Rear Shocks---SQUEAK

22. Relays---CLICK---BUZZ

23. Rods Go---KNOCK-KNOCK

24. Shaft Drives---WHIRR

25. Shifting Trans---CLUNK

26. Solid Lifters---TICK

27. Speedometers---bzzz

28. Starters---CLICK

29. Starter Clutch---GRIND---WHIRR

30. Warning Lights---BEEP

For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.

https://www.hdforums.com/forum/dyna-glide-models/687296-2011-super-glide-custom-rattles-2.html

http://www.mediafire.com/file/u6rd3qqr73d2qug/2011_Harley_Dyna_Service_Manual.pdf

https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc

https://ownersmanuals2.com/harley-davidson/super-glide-custom-2011-owners-manual-66668

https://www.6ya.com/ to speak to me personally

sounds like the baffles have come adrift in your exhaust sylenser

Hi jnflanders,
You've probably solved this by now, but I'll answer just in case. That part is called the stirrer motor. You can replace it yourself, as long as you have an offset phillip's head screwdriver handy.
Before you order the replacement part, figure out if your stirrer is driven by a d-shaped or a square shaft. You can tell by taking off the round plate on the inside top wall of the microwave. GE makes stirrer motors for both d-shaped and square shafts, so you'll have to get the right one. Here's the d-shaped motor that fixed this problem with my microwave: http://www.appliancepartspros.com/part_details.aspx?part_id=2024961.
Good luck!

That sounds like a clutch problem - probably just worn and need replacement. Will definitely need to pull to find exact fault.

Regards

very unlikely it's the motor but could be the bearing is grinding or one of spyder bracket at back of drum has broken off. If you put it into spin with no load and just grinds then bearing is gone. if the drum wobbles and rattles then bracket is broken.LE code may or may not be related. Sometimes just plugging and unplugging the hall sensor at the back will eliminate the problem or just resetting it the way you did it. but if there's a real problem it will come back again.