Mp3 2gb sadisk player

I think you don't need that disk. Every thing at http://forums.sandisk.com/sansa/ , Sansa Clip or Sansa Clip+ you can find it.
Good luck

Visit http://www.sandisk.com and got the download section. Select the required device, download the driver and install it. It may solve your problem.

i herd this worked for sansa players. if u right click the player in my computer on a pc than chose propertys it will show batter charge.

Windows Media player should detect it. Try firing up WMP and then plug in your player. If that doesn't work, try updating WMP while the players connected? If that doesn't work. Do you have the updater installed? Might help.
http://www.youtube.com/watch?v=kVLoG4FWEjc

If you are running Vista, go to sandisk's website and download the updated, Vista-compatible software for the model.

Right click the taskbar and select Properties. Then select Customize - look in past items and see if you find the safely remove hardware option.

-Tha Mp3 Doctor

Hi, try this link-It works

http://www.sandisk.com/sansa/#/support-0/

did you do anything special to it?

Make sure you have the software that came with it installed.

Other methods:

Use Windows Media Player to transfer files.

Open My Computer Open 'Sansa', If you can view your files; you can drag new ones in.

If that didn't help reply with more info

Good luck, please rate.

The Sansa C250 doesn't have a setting on the player to put it into USB, or MSC mode.

By default, it's always in MTP mode (Microsofts slow and crappy DRM enabled protocol).

You can force the player to connect to your computer by doing these 3 things:

1. Ensure that your player is OFF.

2. Set the Hold slider to LOCKed.

3. While holdind the "<<", (LEFT or Previous) button down, connect the c250 to your computer via the USB cord.

You should now see 2 new drives in your "My Computer" window. One drive is the c250's internal memory, and the other is it's microSD slot.