The clock keeps changing time. - Cuisinart DCC-1100BK Black 12-Cup Programmable Coffeemaker

DORTHY DO YOU HAVE MANUEL? KEEP HITTING SET BUTTON UNTIL YOU GET TO ZONE?

Have a look at the manual


Download Center Download Software Firmware Drivers Manuals Samsung

Click on the clock time and you can edit the time and date.

The clock time is on the bottom right hand side of the desktop.

try finding the time zone you are in and use that to set the time, changing the numbers individual will end up with the time going back to the time zone time. So change the time based on the time zone

Is that a question or a statement?

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Sony-ICF-C212-Clock-Radios-manual/id/267ag023/t/2/

Considering a 9VDC battery keeps the clock alive when power is disconnected, I would guess the clock time is independent of line current frequency. Does anyone actually use motorized clock works anymore?

yeap....itz the main/mother board..
contact ur system admin/vendor....

I just figured out how to change mine. remove the battery from the bottom of the clock, keep plugged in, hold down the time zone button and press the set button either up or down which ever time zone you need, it is very simple hope this helps

If you tip your clock over you will see three little buttons under. They are each labeled. Press/hold the one that says "clock" until your display blinks. Use the forward/back buttons on face of clock to re-set time, then press the little "clock" button underneath it again to keep the time you just set. It probably will beep.
When Congress's ideal day comes, re-set it the same way. Sorry, but all this will do is keep you from having to look at the wrong time for a few weeks straight.

Press "Clock", type in the time on the keypad and then press "Start". The clock runs a little slow (at least on mine) and I have to reset it about once a month. It gets about 10 - 15 minutes behind after awhile.