I have my cable box and Roku coming through my tv input to my Yamaha HTR-5450 receiver. However, every time I switch between the cable box to the Roky the Input switches from Auto (which allows the sound to play) to DTS to Analog. Sound for the TV only playes when the Input is on Auto. Is there a code or switch I can set that lock the Yamaha HTR-5450 receiver on Auto only?
SOURCE: Yamaha RX-V363 input settings
HI,you are not getting picture because the yam 363 dose not upscale or convert the picture from the composite input to hdmi.You will have to put a video cable from the composite out put on the amp to a scart convertor into the tv or put console picture into the tv and sound to the amp.
hope this helps.
CABLE GUY.
SOURCE: different sound levels dvd and cable hdtv yamaha htr-6130
Well, first of all, the method you are using is the lowest quality. You should upgrade to a toslink(digital optical cable) or a digital RCA cable. The toslink is the best all around. But it is normal for some devices to have higher sound output than others.
SOURCE: Yamaha HTR-6230 receiver set up w/HDMI no sound
BD and DVR hooked up to the receiver and from the receiver to the TV right? If yes: Your receiver set to pass sound trough to the TV, if you want sound from the home theater setting has to be changed.
SOURCE: Playstation 3 audio connection into Yamaha HTR-6040 AV Receiver
Amazon com Charm sonic Wireless Portable Bluetooth 4 1 Receiver Wireless...
104 views
Usually answered in minutes!
×