Pioneer SD-P5181 will not power up

my blue light stays on when the tv is on
always has
tv works great

standby light is red

ok sir you have defective power supply at hot side section! and the power oscillstion circuit! your unit need to diagnos to know the exact defective parts!

Hi Miquel.

If the unit does not start but stays in standby with the red light on, then the TV is in forced standby mode because an internal problem has been detected.

Try disconnecting power cord for ten minutes. If that does not help, then the TV must be tested and repaired.

Regards.

Ginko

I would suggest replacing the board itself, chances are what caused those fuses to blow is still faulty. did you check those fuses again after you powered it back up?

If the sound keeps working your probably just need a new lamp, if the sound does not stay on, you probably to get someone to fix the power supply.

Unplug the TV for maybe 10 minutes, then turn it on. Sometimes these units simply need to recycle. If that doesn't work, you've likely got serious problems.

My pioneer projection monitor receiver sd-p5181 has something wrong with the srceen it works but it is blurry and has double the picture how do I fix it

if you are not a tech take your set to be repaired your tv illness is in the power supply or related circuit.good luck.

your tv is defected need to take in to the tech for repairs.power supply problem or related circuit.good luck

Check C258 video assy.