Could you send me information to purchase a part -'push handle " ?

Dear Miguel,
No sir, we have no information to share.
Please search for dealers or the factory on your computer search engine.
God bless your efforts.

Hi,

First, you purchase a replacement part. Then, you remove the old part. Then you install the new part. If you are referring to a particular make/model, then you need to include that information.

I bet the grease has set up and the worm gear is just frozen in place. Have you tried spraying some oil or wd40 or silicone lube into the worm gear, and lubricating the trunnion ways? I can't believe that if you've unlocked the handle lock and pushed the handwheel in the saw won't tilt at all. You can download manuals for that saw from here. See page 14 for more details, or get someone who's mechanically inclined to take a look at it for you. If the saw is new, it has a 5 year warranty.See here for repair or parts info.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

You'll have to call them directly to get what was missing since this was newly purchased their phone # is 800-647-2290 Monday through Friday 8am to 5pm Eastern standard time.

Please email me with your request and I will send you info to fix it.
[email protected]
it is basically info on removing coffee oils from the Brew Head Screen.
if that does not work you can contact the service center at phone 201-439-1700 or email:
[email protected]
www.electra-craft.com
Thank you.

It sounds like the disc is bad and needs to be returned. However, this puts you in the terrible position of being in the middle of recovering/restoring your PC, which means it is not usable. I had one recently that hung in the middle of just this type of recovery, and I had to hold the power button until the machine shut down. Then start it back up and start over. Unfortunately, it will likely start the same issues at disc #5. If it does, I would suggest contacting HP to see if they will either send you the content by email, or if you can download it (if you have another connected machine), or - last resort - send you another one which could take days to get to you. If you need phone info please let me know.

If this information assists you in resolving the problem, please take a moment to rate the solution at a "FixYa" level. If you do not feel that you can rate at a "FixYa", please post back with more information regarding what has occurred subsequently and/or more details regarding the situation, and I will gladly help you until we have reached a definitive solution. Thank you for using and rating FixYa!

It is no more than raising the " ****-shell ..you would be looking at the same identical handle that is protruding from the upper part of the case. Usually the handle is a sand color and you will see an arrow on the end of the part you grasp...do you have a fax machine? The reason I say this is that the NP 7130 is the same as a Canon C 122 in all aspects. You can google "How to install toner cartridge in a Canon Copier C 122,and you can get the pictures from down loading the info there, let me know if you want you can email me at [email protected],Regards,Steve

Malber...hmmm..sounds like a european make, right? only way to find that is perhaps accessories at website?

Absolutely!! If youre the original purchaser of the machine, the rebuild program is available for your kirby for as long as you own it.


here's the site for more information
http://www.kirby.com/Portals/0/rebuild_program.html



Its quite a warranty on Kirbys...wish my car had the same sort of warranty

the codes might have got switched somehow (region codes.) go to this site www.videohelp.com/dvdhacks.php follow the instructions.....I hope this helps!!!!