I need to find part that attaches electric plug to kettle,

SMEG DISHWASHER ERROR CODE E2? - How To Mend It

howtomendit.com > Kitchen Appliances, Electric Kettles
Free repair help - smeg dishwasher error code e2. ... Q & As - mend, repair, fix kitchen appliances, electric kettles, kettles, water, not, plug ... Search for - error, e2 ...

You are not specifying what make it is but you hardly get replacement elements for kettles any more. The fact that you can see that power is available at the kettle it is indicating that it might be the element being defective. Had it been it switched on without any water in it? If it is the old type where the electrical cord gets plug in at the kettle check if it is well plugged in otherwise it is time for a new kettle.

I would crazy glue it thoroughly.

kettle defected check for short or to many plugs on servie line try another plug

Please try and check the link below:
http://www.espares.co.uk/search/kettles/morphy-richards/p/1102/511

Hi, follow the instruction below to clean it up...

Unplug the tea kettle from the wall outlet, and detach the plug from the kettle.

Pour 1/4 cup white vinegar into the kettle, and fill the kettle halfway with hot water.

Agitate the kettle so the vinegar mixture hits the sides of the kettle walls, and let the water sit for 20 minutes.

Discard the vinegar water, and scrub the interior of the kettle gently with a nylon sponge.

Rinse the kettle with hot water, and repeat as needed until all buildup is removed. Let the kettle air-dry before inserting the cord back into the kettle.

get it serviced the think is the heating coil may have got burnt out if you need to replace it remove the cover below and take out the coil carefully with the terminals ..now replace the coil of same wattage usually 700watts in the same way
there can also be a problem with some wire got burnt due to heating .try to find the wire located near/attached with the heating coil and check whether everything is correct

Here is a link to Nostalgia Electrics..Fill in their form and you can go from there. Here is the link...
http://nostalgiaelectrics.com/default.asp?a=service copy and paste it into your browser or try to click on it..Hope this helps you..Wayne

You need a new kettle. Call Nostalgia Products at 920-347-9122.

Fill with clean water to fill line. Have base plugged in. Place kettle on base and press down button on top of handle. Water should boil quickly and turn off automatically when done.