How do i enable the iphone

Your iPhone is currently on disabled mode after entering wrong combination of password. There are several ways to gain back the access to your iPhone:

First Method: iTunes
1. Using your computer, open iTunes where you have recently backed up your iPhone.
2. Connect your iPhone. Once your iPhone is detected, a notification will appear to enter your passcode. Note: If the lockscreen doesn't show, proceed to next method.

Second Method: Update
1. While your iPhone connected to iTunes, powered on. Hold down the Power key + Home button simultaneously until the screen off, keep on pressing the Home button then release the Power key until iTunes detected that your iPhone is on Recovery Mode. Note: An iTunes logo will appear on the iPhone when Recovery mode is enabled.
2. On iTunes, click on Update iPhone. It may take a while to download the software, so leave it for a while connected until the installation complete.
3. Once updated, try unlocking your iPhone. Note: If you still can't unlock your iPhone proceed to next method.

Third Method: Restore (last option)
1. If method 1 and 2 fails to unlock your iPhone. Then try to restore your iPhone into its factory default and restore your backup after.
2. Go to recovery mode. See method 2 step 1 process to enable recovery mode.
3. Then choose Restore iPhone. Note: Restoring your iPhone will delete and remove all of your data including apps, music, photos, messages, contacts, notes, etc.
4. It may take a while to download and install the software, so leave your device connected until the process complete.
5. After your iPhone has been restored, choose restore from a backup or iCloud, then wait until your iPhone successfully synced your old data.
6. Try unlocking your iPhone.

-joshd

iphone is disabled connect to itunes HOW???? ' Apple Support ...

discussions.apple.com > Support > Apple Support Communities

Apple Inc.Jul 26, 2012 - i have connected my phone to the computer and nothing. phone still reads disabled connect to iTunes. frustrated!!!!!!!!!!!!!!!!!!!!!!!!! iPhone 4. My Iphone 4S is disabled and says connect to Itunes but i can't as ...
Jan 26, 2014
to allow acesss please respond on your iphone, ...
Nov 27, 2013
ipad is disabled connect to itunes
Aug 11, 2013
iPhone is Disabled connect to iTunes
Mar 14, 2013
More results from discussions.apple.com

If you forgot the passcode for your iPhone, iPad, or iPod ...

https://support.apple.com/en-us/HT204306

Apple Inc.Nov 2, 2015 - ... forgotten your passcode, or if a message says that your device isdisabled. ... If you're signed in to iCloud and Find My iPhone is enabled, use iCloud. If you don't use iCloud and you can't sync or connect with iTunes, use ...

iPhone 4 Disabled but cant connect to iTunes to fix it ... - iFixit

On your iPhone, make sure that

• in the Settings app
  
  • Mail, Contacts...-->iCloud has Contacts enabled (green button)

On your Mac, make sure that

• System Preferences-->iCloud has Contacts checked.

If the iPhone still doesn't sync,

• connect the USB cable from the iPhone to the Mac,
• open iTunes,
• make sure that "automatically sync iPhone when connected" is checked in the Summary window of your iPhone (in iTunes);
• and click "sync" in the lower right corner of your iTunes window.

If you need further help, reach me via phone at https://www.6ya.com/expert/john_77bb351c0c06b354

I'd contact the seller and see what's going on. It could be a stolen phone. Disabled means that someone entered the wrong passcode too many times, and you WILL need a computer (iTunes) to restore it.

First of all make sure your system and your iPhone connected to same wifi network. Try to disable and enable network adaptor of your PC using Device Manager, also disable and enable wi-fi connection after doing that Make sure you have enabled Wireless sync in your iPhone then restart the itunes.. Wait few seconds it will surely find out your iPhone.

If problem still persist let me know.

Looking forward to hear from you.

Thanks & Regards,
Chandrashekhar.

Your iPhone enables you to add a four-digit passcode which locks your phone to prevent unauthorized users from using your cell phone.
When you enable the passcode, your iPhone prompts you to enter the four-digit code before you can unlock your phone.
However, if you have forgotten the passcode and unable to use your iPhone, you can override the passcode using iTunes the default iPhone management program.

Restore your iPhone back to the default settings to override the passcode.
To do so, connect your iPhone to the computer using the USB cable that came with your phone and launch iTunes.
iTunes displays your device in the left panel under "Devices."
Click your iPhone under "Devices" and click the "Summary" tab.
Click the "Restore" button.
Keeping in mind that restoring your iPhone back to the default settings deletes all the currently saved information.
When prompted, click "Backup" to back up your iPhone.
Click "Restore" again and follow the final guided prompts to restore your iPhone back to the default settings.
When the process completes, click "OK." You should see the "Connect to iTunes" message on your phone.
Keep your iPhone connected to the computer until the "Connect to iTunes" screen goes away or you see "iPhone is activated" message on your phone.
Right-click your iPhone under "Devices" and click "Eject."
Close iTunes and disconnect your iPhone from the computer.
Your iPhone no longer prompts you to enter the passcode.

Sometimes in the beginning stages of setting up your iPhone it requires you to connect to iTunes for it to boot up correctly.

Too many wrong tries of entering the wrong passcode can lead to a disabled iPhone. You have to restore the phone in iTunes to be able to use it again. To be able for iTunes to detect your iPhone in recovery mode and enable you to restore, you have to enter dfu mode. Just press the home button and sleep button simultaneously for 10 seconds then release the sleep button but still hold the home button until iTunes can detect the phone. Then press restore and let it do the rest of the process.

That is correct you need to sync your Ipod/iphone for the first time for this to enable the youtube application.. I am thinking this unit is new for you and you never syc it.. S yeah do that at a friends house or your home computer if you have one.. The app will not work until its connected to itunes- thanks

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Enter DFU mode by holding the sleep (top button) and the home button for 30 seconds. Then plug your phone in, iTunes will recognize your phone and will ask you to restore it.
Happy Hacking