I'm looking to buy a USB lead, can you help?

Question edited for clarity. make model (what is is)' first.

$39 and you get some free accessories! :>D

https://www.cafr.ebay.ca/itm/203263611820

Take it to a components electronics store.

https://www.google.com/search?q=polaroid+psd-822+binoculars+usb+lead

..

When you say leads, I assume you are meaning the usb connector. this connector is just a typical usb cable you can get from local pc store, best buy, or online retailer. Just be sure you are getting the one that looks like this.

http://www.walmart.com/ip/15819240?adid=22222222227000675767&wmlspartner=wlpa&wl0=&wl1=g&wl2=&wl3=13692009550&wl4=&wl5=pla&veh=sem

It is the same as a printer usb cable.

Your best bet is to go to a cell phone shop. They will make sure you get the correct USB cable for your cell phone.

click start control panel administration tools computer management device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or

if you can see your usb but its not working
ports(com&lpt)right click update driver

if this fails to fix the problem

check usb leads for secure dust free seating

sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable

just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again,

check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems

hope this helps

if this fails to fix the problem
you might have to install a usb 2 or 3 card they are cheap and easy to install you can buy these on Ebay very cheap
hope this helps

click start control panel administration tools computer management device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or

if you can see your usb but its not working
ports(com&lpt)right click update driver

if this fails to fix the problem

check usb leads for secure dust free seating

sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable

just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again,

check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems

if this fails to fix the problem
type in run "regedit" then press ok then you can see registry editor then locate below key. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11 CE-BFC1-08002BE10318} And remove upper filter and lower filter.

Then restart computer then check.


Also locate the below key and make sure it's value is 3 not 4. HKLM\system\currentcontrolset\services\usbstor make sure start value is 3 not 4

if still no luck
you might have to install a usb 2 or 3 card they are cheap and easy to install you can buy these on Ebay very cheap
hope this helps

click start control panel administration tools computer management device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or

if you can see your usb but its not working
ports(com&lpt)right click update driver

if this fails to fix the problem

check usb leads for secure dust free seating

sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable

just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again,

check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems

if this fails to fix the problem
type in run "regedit" then press ok then you can see registry editor then locate below key. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11 CE-BFC1-08002BE10318} And remove upper filter and lower filter.

Then restart computer then check.


Also locate the below key and make sure it's value is 3 not 4. HKLM\system\currentcontrolset\services\usbstor make sure start value is 3 not 4

if still no luck
you might have to install a usb 2 or 3 card they are cheap and easy to install you can buy these on Ebay very cheap
hope this helps

make sure the lead/s that attach to your hard drive are securely seated
if your computer came with a motherboard disc the drivers could be on it

click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or

if you can see your usb but its not working
ports(com&lpt)right click update driver
hope this helps

click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or

if you can see your usb but its not working
ports(com&lpt)right click update driver

sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable,

just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again,

check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems

if this fails to fix the problem

you might have to install a usb 2 or 3 card they are cheap and easy to install you can buy these on Ebay very cheap


hope this helps you

make sure the lead/s that attach to your hard drive are securely seated
if your computer came with a motherboard disc the drivers could be on it

click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or

if you can see your usb but its not working
ports(com&lpt)right click update driver
hope this helps

click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or

if you can see your usb but its not working
ports(com&lpt)right click update driver
sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable,

just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again,

check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems

if this fails to fix the problem

you might have to install a usb 2 or 3 card they are cheap and easy to install you can buy these on Ebay very cheap


hope this helps you

the projector needs a vga cable or composite connection to show the display from the laptop , it will not work with a usb lead

If you found this info useful please vote for me

vga to vga lead looks like this


a composite lead looks like this

You can buy this cord :

USB Cable Lead Cord for GE GENERAL IMAGINGHope this help and RATE please !