My Patton window fan powers on but fan doesnt work

Question edited for clarity.

This appears to be a Walmart, Amazon, eBay special without a maker website which usually means made in China and sold in bulk. There is limited help here and some videos. Motor and Capacitor wiring all works to the same diagram.

https://www.google.com/search?q=20+inch+patton+high+velocity+floor+fan+wiring+diagram

..

https://www.amazon.com/s?k=fan%2Flight+grill+for+a+patton+bath+exhaust+fan+model+7100L&ref=nb_sb_noss

neither one, check power cable and switch

http://www.pattonproducts.com/service-and-support/service-and-support.html

it would be helpful to clarify if the fan doesn't turn ON or if the fan in fact does not turn, like on oscillate mode. has it worked for you in the past? or been defective since you purchased it?

No! Try checking the capacitor to see if it's bad.

I'm not all up on Patton Model#s, but this is an older unit, correct? You may try contacting Patton (Owned by Holmes now so you may have to go through them)

If they cannot help you, try www.dtvintagefans.org There's collectors there that may have parts fans that they may be willing to sell a blade.

Alternatively, you may try Grainger, as they sell an assortment of blades. You will need to match a blade to your motor though, which should be fairly easy as the Patton fans use a common McMillan motor which most attic fans also use.

I have a metal blade for the Patton U2-20 fan listed on ebay. The item number is 160273949463 and the listing ends on Wednesday August 27 at 10.00 p.m. I had this fan for 8 years and the motor has failed. Patton could not replace the motor since this is a discontinued item, and I figured that someone could use another blade for their fan. I hope this helps you!

I found something on amazon, take a look here: Emerson Fans Moving Air In Style . I hope I have helped. Cheers

These fans have a safey feature (sensor) that shuts the heater off if it is tipped over. It sounds like this component is not functioning correctly - may be set wrong and will not allow the heater to turn on unless you shake it to reset the sensor. If it is still under warranty return heater, if not call Patton and ask for help.