Can we fix this ? - Cooktops

no it is a problem with the hob

consider this

as it is a rental property it is the responsibility of the land lord to get a gas fitter in to fix / replace the problem

If you do not ask him to fix it , if there is a problem and the thing explodes, catches fire or gases some one to death, there is every possibility that he will try to blame you for not reporting it

if he refuses to fix it or tries to fix it himself then I would advise that you seek alternative rental accommodation as the problem is for an accredited gas fitter and not a landlord.

Did you fix the LLLL error on the HOB as i want to know how to fix mine, its giving me the same error..
Thank you
[email protected]

There is no fix. This is normal. All 4 ignitors will spark but the gas will only go to the burner where the gas is active.

The error codes are in the operating instructions if you don't have it ask Bosch to email the error code page to you.

You need to buy the new glass top without the elements, there is no fixing it, or should not be fixed, it should be replaced.

one of your thermostats has stopped working. no easy fix. you can just disconnect the plate and work without it.

Hi Ishiggs,

The ignition switches probably got wet.

Please follow my below Tip on how to fix it:

GAS STOVE CLICKING PROBLEM...

Kind Regards

JEDEMEYER1

* If this solution helped you, please accept it

did you spill liquid on the cooktop? sometimes if you just let it sit for a few days to let it dry out it will fix itself. but if you spilled oil on it it will not fix itself. you have a bad spark module and the only way to fix that is to remove the cookyop fromt he burner box. and find where all the wire go into this usually redish orange box sometimes its blue. but that is your spark module. let me know if you have any more questions

u can fix it,if u have a spare part? try to call the service certer wer u get the parts give the model no,u see ta the bottom of the unit, to fix if remove the all screw u see all the top of the unit to remove the cover plate then u see the part then remove it carefully,always remember the position of the part b4 remove to replace it for ur guidedance. tnx gerbee gomez

one of the burner sensors is fused that burner must be replaced