The hifi system doesnt seem tow ork most things. The standby button on the hifi system does not work. If i use the remote control to turn on and off the system it will work. I try restart tye hifi system by pressing clock set/enter next/power but these bottons does not work. All it works seems to be just cd change and play. Remote control seems to work most things. All i can do is only listern to the radio stations and cd. The cassete wont work it keeps showing play and 2 seconds goes back and plays and goes back it keeps clicking. I want to use the hifi system buttons. But i dont want to always use the remote control. What could the issue be with the system? the power button does not do anything. So it only seems to work on the remote control. I am using diferent speakrs and connect at the back of the system which is like wire cables. I dont want to use the large speakers that coems with it. Too big. So how can i actually restart this system so that 90% of everything buttons on the system will work? because msot things doesnt do anything. When i turn the hifi system stanby OFF via the remote control i start to see demo flashing dancing lights all over the hifi system all over the buttons or most of it all. The power standby button shows a red light but its not very bright combare to the rest of the light flashings. Any help? the manual that cmes with it seems to only talk about inside the system but wont tell me exactly how to fix things or how to fix an issue without trying to open the case because that is dangerous for me. So all it works seems that the display screen on the hifi system works with many flashing graphics. But the power button wont work., The function button and game button wont work... most things wont work.. im currently listerning to Am radio and thee is a green light on the hifi system on the tuner/band And on the side has - and a + i press that but does not work. Only works via remote control only. I press the tuner/band button on the system but that does not work. Only remote control does. But not everything seems to work everything via the remote control just a few things only. Can you help ? thanks.
SOURCE: Shows to be stuck in Standby.
hold down the enter button and the advanced surround button for 5 seconds or so and the amp will restart, the display will come up and hopefully it will be ok. its often caused by using speakers under 8 ohms, or damaged speaker cables etc
SOURCE: Can't get sound from the wireless subwoofer
I had the same problem and it turned out that the directions are very unclear. You need to not only press the ID/SET button on the wireless system, but also on the wireless subwoofer itself. That solved my problem.
SOURCE: stand by button flashes but receiver wont turn on
I have vsx-d812 that has an AMP ERR in error menu. the troubleshooting was found to be Q696 and Q697 in the DC prot. area on "C" board, up near front toward diplay in center of c board. You can get access to error codes on VSX pioneer unit by pressing "enter" and "adv. surr." simultaneously for 2 sec. The display should show what error code you are experiencing. I believe there are three diff. error codes. 1) AMP ERR 2) OVERLOAD 3) BOAD ERR (not mistyped) I hope this helps pinpoint error code for ya.
According to Nintendo u can try this. 1. push the reset button and if that doesn't work unplug all cords and memory cards (including sd) from wii and unplug av from the wii and the outlet in wall. Wait 2-3 min and then plug it back in. Thats as far as i got because that fixed my problem hope this helps someone!!!
SOURCE: Sony DAV-C770 Red Light Flashing but nothing is on!
power supply or power amplifire unit problem.give it to repair proffesional.
nuwan.
202 views
Usually answered in minutes!
×