Need wiring diagram for Emerson MW8992RD microwave.

Last time I opened a microwave there was a schematic taped to the inside of the housing. Good luck.

The turntable motor will need to be replaced, this type of repair is tricky not to mention the lethal voltages it carries. I strongly recommend a professional for this job.

EMERSON MICROWAVE-IF THE SHIELD (METALLIC CARDBOARD THEY CALL SPLATTER SHIELD) IS BURNT OR HAS BLACK SPOTS THROW THE MICROWAVE AWAY. MY SHIELD CAUGHT ON FIRE. MICROWAVE ONLY 3 YEARS OLD. DON'T BUY EMERSON.

Definitely sounds like a defect or misadjusted door switch. This site has venders of M/W parts. FYI,Federal law requires a leakage test after door repair, magnetron replacement or interlock repair.

the belt or plastic gears are shot, you will have to remove housing and have a look under the base plate

Glass tray replacement for the Emerson Microwave MW8992RD has been discontinued.

Hello,
This sounds like a bad magnetron that would have to be replaced. There is up to 2000 volts stored in a microwave, even when unplugged. For saftey reasons I would strongly suggest you have a qualified technician check it out.
Hope this helps.

The keypad may be damaged or worn out, or control unit may be damaged.

I would suggest that you contact Emerson. It may still be covered under warranty.

For more help from Emerson visit here or get help using your appliance at 1-800-898-9020. Get help locating an authorized servicer or parts at 1-800-695-0098.

Power level 10 would be the default - what it is set to unless you manually set it lower.

Power level 0 (zero) is often the setting to use if you just want to use the oven as a timer.

Many Emerson microwave owner's manuals are available for free download here.

Would that answer your inquiry?

If not, please write back with more details.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.