I just want the codes for my remote control to hook up the new cable remote by Penza or at least a way of getting the codes from the TV when the original remote no longer works...

Joel, to configure your new remote you will need the tv code. Have you tried getting help from your tv cable provider? But if you have the code, your remote instructions will guide you.

For a Cablevision cable Provider the remote controller Model Number is UR2-CBL-CV04 and its remote device unique codes for Roku TV become 031, 081. To get a Charter Cable Provider the remote control Model Number is usually UR4U-MDVR-CHD2 and its remote control codes for Roku TV be 11756, 11602. The user on find their respective remote controller code, have to activate their Roku account using enter Roku activate code to get started on streaming their recommended shows.
For a new Cox Communications Cable Provider the remote control Model Number is URC-8820-MOTO and its remote control codes for Roku TV be 1756, 2360. For the DirecTV Cable Provider the particular remote control Model Number will be RC65 and its remote control codes for Roku TV be 11756, 10818. For a Dish Network Cable provider the handheld remote control Model Number is 21.1 IR/UHF and its remote control codes for Roku TV be 535, 556.
The ONN Cable Supplier the remote control Type Number is ONA12AV058 in addition to its remote control rules for Roku TV are 3851, 3201. Once the consumers remote controller are programmed with the respective codes then the user also have to activate their Roku accounts using enter Roku activate code to start out enjoying their preferred streams.
Hope you find your own appropriate code for your cable providers. For any help on adding the RCA Roku TV codes call our technical support staff members through toll-free numbers +1-855-804-1313 or visit them at roku.com/link

The best universal remote is the Logitech Harmony remote. It never gets outdated and will work on any tv. You use their website to program the tv and any other component you have hooked up to it. For example: If you get a new bluray player to replace your old dvd player you simply log back on the website, connect the usb cable that comes with the remote and reprogram the remote.

These are the codes to check with Sylvania brand TVs. 11864, 10054, 10030, 10171, 10096, 11271, 11314, 11394, 11963 These are the codes with RCA RCR312W model remote control. If you wish to get more setup code list to many other popular brands of remote controls, check this link.http://electrohelponline.blogspot.com/

Infrared sensor inside the TV is damaged. Replace it.

The first thing you have to check is your TVs remote control. Check it for its infrared emission. If you wish to get more details, surf this link. http://electronicshelponline.blogspot.com/ There are more than two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help. There is a post, which will give you all details about how to check and repair a remote control. Pull up older posts. If the remote control is found OK, check and replace the infrared sensor inside the TV.

The code for the Dish- are 128,129,130,168,187,188,194,195.....hoppe this was helpful.....

Manuals and codes for Phillips remotes http://www.urc.philips.com/

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/philips/pm435-manual.zip&area=other

Here is the Code and Manual for that remote. Thanks //D

I wrote the code inside the battery cover...1173. Now, if I could get mine to work, I could start using the cable that got hooked up yesterday!