Where is the antenna in the receiver for a Acu-Rite weather station 006-39W

Try taking the inside unit outside as close to the transmitting unit as possible for three minutes. The signal might lock on to the setting you want to receive.

How to make it so we can see it?it is too DIM! :(

http://www.acu-rite.com/product-manuals.html
http://www.ehow.com/way_5552159_acurite-atomic-clock-setting-instructions.html
Please find what you want at the above links....

I have a acu-rite weather station and it keeps blinking even after changing batteries, is it garbage now or can it be saved

The instruction manual can be viewed and downloaded here: http://acuriteweatherstation.com/manuals

flashes continuously the time and the outside timp

Double check the batteries and the direction in which they are installed. If there is one backwards in the sending unit that is outside, it will not send a signal. Also, there is typically one battery in the indoor unit that is responsible for receiving the signal from the outdoor unit. If all of the batteries are in correctly except that battery, you will see the display, but will not get the data transmitted from the outside sending unit.

The main thing with this unit is to put the batteries in the transmitter first, then in the base receiving unit. Then you can't really make any setting changes until the unit figures out the correct time through the radio signals it receives from Colorado, or wherever they come from.

Its a remote temperature sensor to read a aquarium or refridgerator or pool water temperature