Irons Logo

Related Topics:

P
Peter Lupevski Posted on Apr 02, 2015

Where can i get a manula for Delonghi stem iron model VVX810

MY IRON GETS HOT BUT NO STEAM IS COMING OUT EVEN WHEN ITS FUUL OF WATER PLEASE HELP

5 Related Answers

snakehead

Henry Thomas

  • 1074 Answers
  • Posted on Apr 18, 2007

SOURCE: Heats up but no steam coming out.

take down the iron and clean it the holes at the bottom of the iron are clogged up.good luck.

Ad

Anonymous

  • 59 Answers
  • Posted on Nov 15, 2007

SOURCE: Brown spots coming from steam iron

you can mix 50% water with 50% vinager let it set in the iron overnight then turn it on and let the steam run out.What happens is the inside of the iron where the water is had corroded or rusted or has lime deposits.the vinager will break this loose overnight.also after you let the iron steam out all the mixture,flush the iron 4 to 5 times and start using fresh water from a store bought gallon.your tap water is probably full of iron.

Anonymous

  • 304 Answers
  • Posted on Jul 24, 2008

SOURCE: Brown spots coming from steam iron

Fill with 50/50 water vinegar solution. Get it good and hot and let it sit for two hours. Rinse and repeat if necessary. Buy a gallon of water from the market and use that from now on. This will fix your problem. The Iron is concentrating the iron in you water and this is what is causing the brown spots. Hope you find this helpful. If you do please take the time to rate it fixya and maybe I will keep helping people for free.
George

Anonymous

  • 1 Answer
  • Posted on Oct 07, 2008

SOURCE: Hinari steam vapor iron Model HIN001

More complete answer...
If you are having steam problems then the cartridge needs changing.

I phoned them (0161 652 1211) and they do sell the cartridge for £5.99 including delivery but are out of stock for a couple of weeks. You have to send them a cheque or postal orders. Good luck.

Send Cheque for £5.99 for each cartridge with note of model etc.
Pulse Home Products Ltd.
Middleton Road
Royton
Oldham
OL2 5LN

Anonymous

  • 1 Answer
  • Posted on Aug 10, 2011

SOURCE: i have an elitech steam generator iron but water

I have had this iron for 5 months and only been used 4 times. When I turn it on , there is water leaking out of the iron and the handle is too hot to touch after a few minutes

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Should the cable from the machine to iron get hot

Hi,
If the iron is a steam-iron with a steam tank in the base-unit, then steam is carried up the connecting pipe & it will get hot in normal use.
If you put water into the iron itself, then there is only an electric cable connecting the base & it should never, ever get hot. A little bit warm maybe, but never hot.
Best of luck.
Mar 09, 2018 • Irons
0helpful
1answer

Water coming out of steam holes

Either: the iron is not hot enough to heat the water to steam temperature or the internal water-flow valve is leaking so that too much water is getting through. Check the iron is getting hot enough first. If it is then run some de-scaler (as used in kettles) through the iron to try to clean all the passageways. Always ensure that you fully re-flush the iron after de-scaling or you'll damage your clothes with any acidic residue left in the iron.

Good luck.
Dec 04, 2016 • Irons
0helpful
1answer

Can't seem to prime iron to get the steam coming

  • if your having trouble getting the water in the iron to steam, try turning the heat setting all the way up and then add cold water to the resivoir. your iron may not be getting hot enough
Oct 11, 2014 • Irons
0helpful
1answer

How do I use the self clean button in the DW5080 Focus 1700 Watt Steam Iron

please read carefully the owner manual and get the information about how to use the steam.
download from www. fitness.manualsonline.com

God bless you
0helpful
1answer

I have so far seen 3 other people with the problem i have with my russell hobbs steam glide iron 13153. I have tried what was suggested to me but nothing has worked. the iron gets hot but no steam coming...

I would write to russell hobbs and complain, my friend bought one of these 18 months ago and hers got hot but no steam through. She sent it back to them and they sent her a new one as a gesture of goodwill.
0helpful
1answer

I have a hinari steam generator iron and the steam has stopped coming through the iron and now coming through the base that the iron stands on!can anyone help please

Check the water reservoir of the steam generator and look for some hairline cracks. Also a clogged tubing will likely to go back water on reservoir inlet water pouring. Once you found the cracks, seal it with epoxy just enough to fill the cracks.
Thanks for asking.
3helpful
1answer

Brown spots coming from steam iron

Fill with 50/50 water vinegar solution. Get it good and hot and let it sit for two hours. Rinse and repeat if necessary. Buy a gallon of water from the market and use that from now on. This will fix your problem. The Iron is concentrating the iron in you water and this is what is causing the brown spots. Hope you find this helpful. If you do please take the time to rate it fixya and maybe I will keep helping people for free.
George
0helpful
1answer

Heats up but no steam coming out.

take down the iron and clean it the holes at the bottom of the iron are clogged up.good luck.
Not finding what you are looking for?

153 views

Ask a Question

Usually answered in minutes!

Top DeLonghi Irons Experts

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39387 Answers

Are you a DeLonghi Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...