- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The message "Time for periodic maintenance 0008" on your Toshiba 307 model photocopier means that it is time to perform routine maintenance on your machine. Here are the steps to clear the message and reset the maintenance counter:
Press the "Utility/Counter" button on the control panel.
On the touch screen, select "User Management."
Enter the administrative password (default is "123456") and press "OK."
Select "Maintenance Counter."
Find the "Periodic Maintenance" option and select it.
Press the "Clear" button to reset the maintenance counter.
Press "Exit" to return to the main menu.
After these steps, the "Time for periodic maintenance 0008" message should be cleared, and the machine should be reset to zero. It is recommended to perform routine maintenance on your photocopier periodically to keep it running smoothly and to prolong its lifespan.
On the typical Honda gauge layout, there is a small, rectangular, recessed button directly to the left of the "Maintenance Required" light. Using a key, you can press this button in, With the key off, hold down the trip meter reset button. turn the key on and continue holding the reset button in until the maintenance light goes off, about 10 seconds. which will cause the light to turn green. The maintenance light (at least on Civic) will come on about every 4000 miles if not reset (for oil changes), and also periodically for other scheduled maintenance.
maintenance lights often mean nothing except that a certain period of time or mileage has passed. Whoever changed the oil probably didnt reset the maintenance counter.
Go
into (08) mode by holding 0 and 8 when turning on the copier. 251 is
the number of copies until it displays that message and 252 is the count
since last Preventative maintenance. Resetting 252 will clear the
message or putting 251 higher than the value of 252 will clear it as
well.
yep. as long as the print quality is good and stable, and the toner consumption is good (8K to 10K of pages per bottle) you can just reset the maintennace count at f7-03 on service mode. probably your machine count reached at 120k. :)
Periodic Maintenance will appear if the PM counter setting is reach. Normally, it wouldn't affect your machine, just that the message will shown at panel.
U can enter setting mode 08-252 to, set "0" to clear the counter, or 08-251, set "0" to disable the PM counter.
If your machine having problem, totally cannot run, u can enter 08-253 to display the last 8 error codes.
×