How do you remove hold function - Sony NWZ-E436F MP3 Player

To mute your microwave, start by checking the control panel. Look closely. The mute function may be labeled as a secondary function of one of the standard buttons. Check these things first:

• Look for a Sound button. Seriously. It may have been there all along, begging you to press it.
• Press and hold either 1 or 0. Sometimes manufacturers give these keys hidden, secondary functions.
• Press and hold the Stop or Cancel button. Like 1 or 0, this key might have a hidden function when held.

Often, pressing and holding 1, 0, Stop or Cancel will either result in turning off the beeping sounds or activating a child lock feature. (Child lock doesn't actually lock the door, but instead locks the control panel so no buttons can be pressed until the lock is removed by holding the button for around three seconds again.)
If none of these work, it's probably best to consult the manual. Even if you don't have a Sound button, there is no Mute function denoted as a secondary function or holding a button doesn't do anything, there is still a chance a mute function exists. It could be a button combination or, like on some microwaves, be buried in a submenu that's not at all obvious how to activate.

Hi.

To mute your microwave, start by checking the control panel. Look closely. The mute function may be labeled as a secondary function of one of the standard buttons. Check these things first:

• Look for a Sound button. Seriously. It may have been there all along, begging you to press it.
• Press and hold either 1 or 0. Sometimes manufacturers give these keys hidden, secondary functions.
• Press and hold the Stop or Cancel button. Like 1 or 0, this key might have a hidden function when held.

Often, pressing and holding 1, 0, Stop or Cancel will either result in turning off the beeping sounds or activating a child lock feature. (Child lock doesn't actually lock the door, but instead locks the control panel so no buttons can be pressed until the lock is removed by holding the button for around three seconds again.)
If none of these work, it's probably best to consult the manual. Even if you don't have a Sound button, there is no Mute function denoted as a secondary function or holding a button doesn't do anything, there is still a chance a mute function exists. It could be a button combination or, like on some microwaves, be buried in a submenu that's not at all obvious how to activate.
If you've tossed the owner's manual to your microwave, check the manufacturer's website. They will often provide a digital version of the manual as a PDF for more recent models. For an older model, you may need to do some digging, but a great start is to just do a Google search for "[microwave brand and model number] manual."
Once you have the PDF version of the manual, press Ctrl + F on Windows or Command + F on Mac to search the PDF for "mute," "sound" or "beep."


Good luck.

You will need to get the "boot program" information
Function 91 enter. this will display 4 items of information press cancel to return to main screen.

This is an example of what will display.
TSPOS7 Program name
07A Program release
DLL-00 Download release number
T7AEPRM410 Boot program name and release number
7000011 Profile ID
you can now perform a boot function download, press Function 99 and enter. PW 028510 Enter , 9 enter, 6 enter, 2 etner, if prompts for host press enter, 1 enter, cancel, Configure terminal or call help co. put into boot function. this will take you out of boot function. unplug terminal and hold down void, offline and plug back in. hold down till 2 beeps ar heard. you will be asked to enter information you gathered from earlier.

hi , the hold key is on the right edige of the phone , with a "lock" symbol. Press the key , for a longer period ( 2 seconds ) to use the in -call menu features.

open the trunk and peel back the carpet so you can see the back site pf the tail light. first remove the bulbs and place them somewhere they cant get broken. locate the screws or nuts that hold the tail light lens on to the car. using the proper size tool remove any hardware holding the lens on which stand out because they are usually the only ones you will see in this area behind the carpet(ya cant missem). once removed replace with new lens replace the hardware and dont forget the bulbs and also a function test to make sure they work correctly before you hit the road. have a second person use all functions like stop,turn,reverse ect...if all functions work like they should you are good to go.

There are two lock conditions for this device.

If you can't eject the disc:

Enabling removal of disc

1. Select the DVD/CD function.

2. At POWER ON condition, press and hold down the stop button and the power button on the player for at least three seconds.

(The message, "___LOCKED_" appears when the function is activated.)

If you can't operate the functions:

Enabling operation of selector and disc

1. Select the DVD/CD function.

2. At POWER ON condition, press and hold down the play button and the power button on the player for at least three seconds.
(The message, "___LOCKED_" appears when the function is activated.)

Hope this helps!

Hi xvbanh,

You need to free up some memory. Try clearing your RAM. Your calculator should operate properly afterward.

Go to [2nd] [MEM] [7] [1] [2]

If your calculator still won't let you delete the RAM memory try the procedure below.

Remove one of the AAA batteries. Press and hold the [CLEAR] key. While holding [CLEAR],
reinsert the AAA battery and then turn the calculator on. The calculator should display the
message "RAM Cleared". Release the [CLEAR] key and then press it one more time to remove the message.

You've had too many fuser jams. Remove the fuser and inspect the heat roller and separator claws. After putting the fuser back in, you must do an lbp fuser reset in F9-6 mode. While holding down the function key, press original size ledger key. While holding those down, press the 3 key. This gets you into service mode. Press the stop key, then while holding down function key, press clear key to exit service mode.

switch off radio. not by the key but by the button. Hold down function until a menu comes on and then scroll through the menu using function button...
You cannot program this while it is on it needs to be in standby mode.

This is for a 97 but it may give you some help...

MULTI-FUNCTION WIPER SWITCH
REMOVAL
Tilt the column up and remove the six screws holding the lower column shroud.
Tilt the column down and remove the upper shroud Upper Shroud Removal
Tilt the column up and remove the one steering column tilt lever screw at base of lever. Remove tilt lever and lower shroud.
Using a screwdriver in place of the lever, tilt the column down. Remove the two mounting screws on the switch and remove the switch. Remove the wiring from the hooks and disconnect the two electrical connections on the multi-function switch. Remove the multi-function switch.