Hi... lost safety key for York t930 threadmill where could I get one from please...

Please clean the contact with electronic cleaner contacts very well the male and female contacts.
If you are using the Magnets, clean IT.
However if the problem persis the EPROM or software program is Faulty. Call to the supplier company treadmill for to replace as acccording serial number machine+mdeol the correctly EPROM software.

Blessing.
[email protected]
cell+whatsAPP:+50588611441

Sounds to me like the motor has a shorted field coil or open or shorted armature. The motor is bad, you can order a new one at the companies website.

you can go www.fitnessrepairparts.com or www.treadmillpartszone.com

God bless you

hi,
By error 7 it means that the safety is not positioned correctly. or the saftey switch inside the unit is faulty. Its a magnetic switch. When you place the safety key (its made of magnet) this switch will activate. Then only teradmill start. Check the safety key is positined correctly or not. If it is in position then you have to replace the safety switch inside the control console.
OK

i just had a noise in my York T301 that sounds exactly the same as yours. It also came up with a E1 error code and stopped working. I pulled the motor hood off and noticed that the magnet in the drive pully had come dislodged. It was hitting the speed sensor near the belt. Glued magnet back in and all better. Hope this helps.

here's a link to an ebay page of treadmill safety keys for horizon treadmills. hope this helps!

I have misplaced my safety key for my York Pacer 2750 Treadmill and can no longer use it. Please help me find a replcement soon. The company York Fitness no longer do this model and don't have the parts either. Help....

Error 7 is a Safety Key Error....
That's the red circular magnetic insert that slots into the front of the console...
The manual says : Simply secure the safety key in place and then 
try again..
hope this helps

There's a little breaker near the main on/off switch that has tripped. Re-set the breaker. (also check the main on/off switch, typically near where the power cord enters the treadmill...

Error 7 is a Safety Key Error..
that's the red magnetic circular thingy on the console.
Simply secure the safety key in place and try it again