Why are Blender blades moving very slowly?

this part is broken. Ineed know the price and shipping and handling

Sounds like its overloaded. Feed it slowly

The motor windings have failed. It needs the motor replaced, so it will need to go to a repair center near you. You can find all the information you need from their website.

Hi. Our Bobby Blender jar broke and we can't find a replacement. We can part it out; do you still need the blades?

Watch this video. If your jar has a lid that screws in rather than pushes in you unfortunately have to purchase a new lid, blade, gasket and collar.

Does the motor still work if you take the pitcher off of the base? If so, the rod that's in the blade assembly is probably corroded. The blades are connected to a metal rod that passes through a brass tube through to the piece that makes contact with the motor when you put the pitcher on the base. The grease wears down eventually and if you don't pulse and run the motor for a long time at once, the heat can corrode the bar and cause the blade to stop spinning. You can either disassemble the blade unit, or buy a new blade unit online. google blender parts and you can get one for $10

look on ebay for a replacement second hand unit

Take it apart and pit the gasket on the other side of the cutter assembly.

Depending on the age of your blender, a new blade assembly may be available. I would recommend calling Kitchenaid Customer Service for pricing. Their toll-free telephone number is:

1.800.541.6390

to see if its the Triac or just the off button perform this: connect the blender,while pressing the off button press the on button; if the blender stays on and you dont hear the relay function (Light ticky sound) maybe the off button get a broken solder point. But if the relay is functioning and there is no way to change the speed the problen is the TRIAC. This is a small piece on PCB with a heat sink