My vision 300 dryer works but no heat ? - Bosch Vision 300 DLX Series WTVC4300US

call an electrician to fix/replace the heater element or the heater switch

Check for power at the gas solenoid valve, work your way back to the high limit thermal cut off

Do you use dryer sheets? The chemical in dryer sheets seal up the little holes in the lint filters. To test, take the lint filter to the sink and see if it holds water. If it does, give it a good scrub and toss out the dryer sheets.

What is the model number?
Exactly which parts did you check?
Also, check the breakers. The breakers are 220 and one of them may have thrown not allowing it to heat but the dryer will run.

I just want to put this information in the Internet because I found nothing but an accurate and incomplete information. The Bosch 300 series electric dryer absolutely, positively, does have a reset switch. To access it you have to take the entire back plate off the dryer. There are like 30 torques screws. Takes forever. When viewing the back of the dryer down on the lower right there is a silver box shaped thing that is your heating element. Next to it is a red button. While googling I've found a dialogue between a repair man and a customer and the repairman said he looked at the schematic I did not have a reset switch. That information is wrong

Hi,If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly.if you dryer is gas check out this gas no heat tip....If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101

Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.

if you dryer is gas check out this gas no heat tip....

If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.

check out this electric no heat tip...

heatman101

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101

Hi,
If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.

if you dryer is gas check out this gas no heat tip....

If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.

check out this electric no heat tip...


heatman101

as long as u want as long as there are not allot of bends, the straighter the better.