How do I peak and tune my cb and what chanel do you set it at

Click on this link for the 2.3 engine firing order.https://www.autozone.com/repairinfo/specifications/specificationsMain.jsp?childCatName=Firing+Order+/+Cylinder+Location&childCatId=26200242&categoryNValue=26299999&categoryNameForTitle=Ignition+and+Tune+Up&categoryName=IGNITION+AND+TUNE+UP&childCategoryNameForTitle=Firing+Order+/+Cylinder+Location Click on this link for the 3.0 engine firing order.https://www.autozone.com/repairinfo/specifications/specificationsMain.jsp?childCatName=Firing+Order+/+Cylinder+Location&childCatId=26200242&categoryNValue=26299999&categoryNameForTitle=Ignition+and+Tune+Up&categoryName=IGNITION+AND+TUNE+UP&childCategoryNameForTitle=Firing+Order+/+Cylinder+Location

In my experience the cheap ones you just add, dont.
the more expensive "tuner" chips will allow you to adjust several different settings, allowing you to find peak performance, and make adjustments for weather conditions, altitude....

http://www.autozone.com/autozone/repairinfo/specifications/specificationsMain.jsp?childCatName=Firing+Order&childCatId=26200242&categoryNValue=26299999&categoryNameForTitle=Ignition+and+Tune+Up&categoryName=IGNITION+AND+TUNE+UP&childCategoryNameForTitle=Firing+Order

the radio is failing.

You don't give a mileage , perhaps all the injectors require a service, change the fuel and air filters this may help.

the owner of the car should be able perform engine tune-up . Prepare the tune up tools and materials . so that when tune-up is performed ,engine should be on peak performance and within specification.Use multi tester , Use timing light,use dwall meter ,use tachometer ,use feeler guage, adjust spark plug and contact point gaps. Adjust Idle speed and Idle mixture. Adjust tappet clearance,observe safety rules.If the owner of the car cant do the job done because of work then the owner of the car should go to a car mechanic and let them tune-up the engine.

burning rich. Add SEAFOAM to your tank(at part stores everywhere) to a tank of Premium gas, and add every 3000 miles to fuel. this will help the carbon and running rich problem.

I would make sure the engine is properly tuned. The miss fire condition could be making the transmission run poorly. Once the miss fire is repaired , then recheck the transmission.

The miss fire can be caused by several things after the tune up is done. The ignition coil, the fuel pump and filter , the computer , injectors do carbon up.

So when getting the tune up ask to have the injector cleaning done. The injection cleaner for the engine is from the dealer . They have a special cleaner . This is a common repair per Chevy to have the injection service done.

Good luck

On a Cb23 it is 1-2-3