TV Power on - No Picture

Replace your power supply

You may want to shop for that board or at least consider removal of the HDMI socket in question---tested for shorts there I presume?

It trys to start but no picture? That means it's time to replace the lamp.

red light is on, but when the tv is turned on, it immediately shut down and goes back to the red light setting. It is like it blows a fuse or something to that effect.Post Solution

First area to check out is the power supply of the set.

Please recheck Lamp Cover and make sure it is fixed in its space securely as 3 times red blink shows lamp cover error.
There is small safety switch in TV cabinet under lamp cover that has to be pushed by lamp cover if it is fixed in its position properly. That switch is not being pressed by lamp cover and causing this error.
Thanks.

this problem is in the power supply.the red lights indicate as the standby mode.

my sony red light flash.but it will not turn on just clicks

I have a sony tv PFM-42B1 when I turn it on it go to standby an a red light flash I count count 14 time but I heard that it only support to flash 1 to 6 time how do count the flash

I have a Sony KDS-R60XBR2 60" SXRD and the power/standby light flashes green 96 times than it switches to a RED lamp light that flashes steady. Do you know what it means?