I need the owners manual for a scm3657 humidifer

Humidifer FAQ's - General Filters, Inc.

www.generalfilters.com/support/faqs/humidification.html

I already have a GeneralAire® 1042 Humidifier installed, but have a 4,000 square foot home. Should I ... Can't I simply clean my Vapor Pad instead of replacing it? Where do I find ... I am seeing a very slight water leak coming from the bottom of my steamhumidifier. What do I do ... Legacy 1137 = 21 GPD / Up to 3,000 Sq. Ft.

GeneralAire® Legacy 1042 and 1137 Humidifiers - YouTube

? 3:22
https://www.youtube.com/watch?v=IM6IXVcjEdU
Jun 27, 2013 - Uploaded by GeneralAire Inc
GeneralAire® Legacy 1042 and 1137 Humidifiers - How to change the vapor pad .... Evaporator Pad (aka filter) change on aGeneral Aire 1042 ...

[PDF]General Aire Humidifier Owners Manual - On Time Mall

reset the humidifer, Turn off, wait for 3 minutes, and try again.
If the problem persist, see your owner manual go to the website from the supplier and get support via ONLINE chat for fix it.
God bless you

Sounds like a Water Level Sensor problem. Read the service manual, pages 51 and 53.

http://www.forwardthinking.honeywell.com/related_links/humidification/69_2285.pdf



Unplug the power cord. Turn OFF water. Remove the Water Level Sensor - One screw holds down the spring clip. Remove water scale in the compartment and on the Sensor. Test Sensor with an ohm meter. If OK, reassemble and try again. If bad, replace the sensor.


If you have heavy scale buildup in the sensor compartment, you need better water filtration. Your problems are just starting. This system can be very difficult to clean thoroughly.

Since it's a Kenmore, you can get an Owners Manual from Sears Parts Central. You'll need tohave your Model # handy.

google owner or operator manual with the brand and model number,. it should be readily available online..

Best regards
Ck

http://safemanuals.com/user-guide-instructions-owner-manual/HOLMES/HM3500-_E

Here is the general download page for all AOS manuals and quick set-up guides.

Here is the direct link to the AOS 7135 manual in pdf format.

theholts220 - Sounds like they needed to install a bit larger transformer . You can also buy a A 50 Sensing relay that attaches to the wires for your motor and when you turn on the furnace it will allow the power to go to the humidistat. Very strange though they do not use a lot of power. Check and make sure the wires are not pinched or touching metal somewhere.


TLuzzo - The humidistat seems to be working when you turn it down. The wires for the solenoid should be hooked up to your furnace circuit board. The instruction manual will tell you where. If you dont have a spot on your circut board the A 50 sensing reley is they way to go. They are inexpensive

You can down load the manual in pdf format from this site:
http://www.amazon.com/Honeywell-V5100N-Ultrasonic-Humidifier/dp/B000056HL5
Scroll down to Product Manual [205kb PDF] & download.

If you do not have Adobe Reader which is used to read the pdf file you can download that from this link for free:
http://www.download.com/Adobe-Acrobat-Reader/3000-2378_4-10000062.html

I believe the manual will answer all of your questions..

Good Luck & Best Regards.
please vote...