How to fix key pad on ge convection oven jvm1790bk. Pad stopped working

Replace keypad

They do have a main power fuse behind the control board.

GE has the manuals for most of their appliances on their site: http://www.geappliances.com/service_and_support/literature/ . Just enter the model number and click Submit.
The direct link to the manual for the JVM1790 Over-the-Range Convection/Microwave oven is here: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40480-1.pdf . GE only lists the JVM1790CK, JVM1790BK, JVM1790WK and JVM1790SK.

I hope this helps.

Cindy Wells

HI, the Key panel (touch pad) is shorted.

This code will occur if a shorted key panel is detected continuously over 60 seconds. Replace key panel (also called touch pad).

try removing the touch pad/switch membrane and cleaning connections on ribbon cables. if problem still exists replace switch membrane.
Phil

HI. this will happen over time if the microwave is used heavily and if it is over three years old. this key pad is attached to a smart board that you will need to replace. replacing the smart board will fix this issue.

change the tube/heating element

F 11 code. it is a touch pad error.
If you just cleaned the control panel it may have water in the panel causing a key to stick.
If after a day or 2 it hasn't dried out - then you will need to replace the touch pad.

Visit www.searspartsdirect.com and enter in your full model number for a parts breakdown and schematics.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Press options on the key pad, turn dial to "idioma", press and turn dial to "ingles"

buy a new one they are not expensive wal-mart has 1000w for about 80 bucks