How do i take off "ringer off" because i want to hear my phone when it rings

Just set the ringing volume to off.
You can choose from four ringer volume settings (off, low, medium, and high) separately on each handset or the base.
With the phone in standby, press or on the handset or VOLUME or VOLUME on the base. The handset or base sounds the ringer at that level. Use on the handset or VOLUME on the base to make the ringer volume louder. Use on the handset or VOLUME on the base to make it softer or turn it completely off.
Note: If you set the ringer volume to Off, the handset or base won't ring. Other handsets or base will ring according to their individual settings

Hi, what makes it when disconnected to ear piece. When ear piece is not in my ear, you can not hear the phone ring is because the ringer of the phone that makes you know when there is an incoming call on your cell phone or a message alert tone on your cell phone is damaged and does not work and makes sound to notify you .

The ringer is a tiny speaker inside the cell phone that allows you to hear incoming call from your cell phone You will need to replace the ringer inside the cell phone ....

When you replace with another ringer (speaker inside the cell phone),phone will be Ok again.

Would advice that you contact an expert in phone repairs for asistance,that will do you good to prevent more damaged on the phone...

Take care.....

Hi, what makes the ringing of the phone to be quite to hear is because the ringer that makes you hear when the phone rings is getting weak and it needs to be replaced.

When you replace the ringer the phone will ring better again.

Take care.

Hi, what causes the phone not to be able to ring out is due to the ringer inside the phone that allows you to hear a ringing tone is bad.

You will need to replace the ringer inside the phone. When replaced phone will start ringing out and you can hear when it rings out.

have a nice day.

Hi, what causes the phone not to be able to ring out is due to the ringer inside the phone that allows you to hear a ringing tone is bad.

You will need to replace the ringer inside the phone. When replaced phone will start ringing out and you can hear when it rings out.

have a nice day.

Hi, what causes the phone not to be able to ring out is due to the ringer inside the phone that allows you to hear a ringing tone and can be used as external speaker too.it's bad.

You will need to replace the ringer inside the phone. When replaced phone will start ringing out and you can hear when it rings out.

have a nice day.

First Option:'
You Go to Phone Setting and Ringing Setting If Phone Ringing Setting ok
So
Secend Option:
Your Phone Ringer Fault So Please change Ringer and Ringing Problem will Solved Quickly

If she could hear the phone ring, what would she do, put in her hearing aids and answer the phone?

Walker/Clarity makes a complete set of HAC phones. From this link http://shop.clarityproducts.com/products/categories/category330.asp step to the second page and you will find Ameriphone external ringers.

Moderate to severe hearing loss means $$$ when you buy a complete phone, but there is a cordless for about $120 list that might be a better product.

Carl

Adjusting the Ringer Volume (From the Uniden manual)

You can choose from four ringer volume settings (off, low, medium, and high) separately on each handset or the base.

1. With the phone in standby, press ArrowUp or Arrow Down on the handset or VOLUME + or VOLUME - on the base. The handset or base sounds the ringer at that level.
2. Use Arrow Up on the handset or VOLUME + on the base to make the ringer volume louder.
   
3. Use Arrow Down on the handset or VOLUME - on the base to make it softer or turn it completely off.
4. When you hear the ringer volume level you want to use, stop pressing keys.
   
5. The handset or base will use the new ringer volume starting with the next incoming call.
6. If you set the ringer volume to Off, the handset or base won’t ring.
   
7. Other handsets or base will ring according to their individual settings.

The VT-9118 can use one of 4 different ring tones, and can be turned off. 

To reset your ring tone: 

1. Remove the handset from the base. 
2. Press PROG. You should hear a single short beep.
3. Press #.  You should hear a single short beep. 
4. Press a number 1 through 4. You should hear a long "ring" tone (it might be startling!). You can try other numbers from 1 to 4 to hear them all.  
5. Press MEM to confirm your ring. You will hear a medium beep. 
   

To turn the ringer off, follow the same instructions, but choose number 5. 
Hope this helps you. If you need for information, you can download the user manual from http://www.vtechphones.com/docMgt/public/art/313/vt9118.pdf