CHANGE SPEED DIALS ON SAMSUNG 816 - Samsung Prostar 816 Phone

It's not called a Prostar in the UK but is known as the Samsung DCS 816. The follow clip will show you how to add to the system speed dial directory. But you can find 60+ handy clips at www.AbbeyTelecom.com

To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down, enter #20 the screen should say MMC DISABLED
enter in 1 2 3 4 1 # (that enables programming)
enter in #62 the screen should say day ring assn
press the line you wish to program
press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
press # when finished with the line
repeat steps 2 through 5 for the remainder of the lines you wish to change
press # when finished.

To change the time on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down, enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #55 the screen should say YYMMDDWHHMM
3) enter in the year, month, day, day of the week, hours and minutes(the day of the week values are 1= mon. 2= tues. etc.)
press # when finished.

To change the time on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down, enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #55 the screen should say YYMMDDWHHMM
3) enter in the year, month, day, day of the week, hours and minutes(the day of the week values are 1= mon. 2= tues. etc.)
press # when finished.

To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #55 the screen should say YYMMDDWHHMM
3) enter in the year, month, day, day of the week, hours and minutes(the day of the week values are 1= mon. 2= tues. etc.)
press # when finished.

I have posted a video which shows step-by-step how to change the date and time, written version is available at http://www.abbeytelecom.com
I hope that this helps

for this problem and more view the attatched Video and there are plenty more helpful training tutorials on YouTube- search 'abbeytel' or visit www.abbeytelecom.com, I really hopes that this helps

with the handset on hook dial #06 the display should read MMC DISABLED enter 4321 then 1, press # to enterpress ALM/SD button, dial the 2 digit code 10-98, dial the phone number you want stored ( pressing hold inserts a 3 sec. pause and msg inserts a hookflash) press the ALM/SD button to store the number. repeat the procedure for additional speed dial programming.
hope that helps

If you have a programming manual you can change the settings on your own. If not, you will need to contact the installer or a local interconnect company that services Samsung. It seems as though the memory switch inside the ksu is turned off. If that's the case, it needs to be turned on and if not, you either have problem with the ksu or the power outage was a brownout. Sometimes a very short loss of power can cause corruptions in memory, however I seriously doubt it in this case. Your system is acting as though it's memory has been set to default.

Good Luck,
BB

nedd to get phone to say enable