Airlink ar430w not giving a network address to netgear wpn111

Read this http://airlink101.com/download/download_links/q-ar430w.pdf

http://airlink101.com/download/download_links/q-ar430w.pdf

If the laptop cannot connect to the wireless router then the wireless card in the laptop has not been configured with the router's wireless settings.
To secure your wireless network, configure the wireless router and wireless card in the laptop, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

plug in the usb adaptor in ur laptop and it should detect the wireless signal one detected give it ur private key and ur done

As u have upgraded ur router setup ..
And u have tried all possible troubleshooting steps..
Please upgrade the adapter drivers using
http://kb.netgear.com/app/answers/detail/a_id/12520

And after upagrading the drivers ,
Uninstall the adapter and reinstall it ..
I hope it will be connected ..

if you have any firewall or antivirus software in you computer means please turn off the firewall and check whethr the internet connection is working

Please note that this adapter is compatible with Vista 32 bit OS.

Hope this helps.

Hi, Can you provide some more details:

1. Model number of wireless router?
2. Are you online when connected direclty to the wireless router using ethernet cable.
3. Operating system on the computer with the adapter WPN111.

This will help me provide an effcent resolution.

Check what security encryption is being used on the wireless network. Also, if you are using MAC filterning on the wireless network then disable it and then try connecting. Moreover follow the steps below to connect to the wireless network:

1. Right click on My Computer icon and go to Manage.
2. Go to Services then go to Service and Applications.
3. Double click on Wireless Zero Configuration.
4. Change the Start Up Type to Automatic and click on Apply
5. Click on Start and press OK to close the window.
6. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
7. Right-click on the wireless Network Connection icon and select 'Properties'.
8. Go to the 'Wireless Networks' tab .
9. Check the option 'Use Windows to Configure this Wireless Connection' and click 'OK'.
Now please perform the following instructions to connect to the wireless network:
1. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
2. Right-click on the wireless Network Connection icon and select 'Properties'.
3. Click on the 'wireless network' tab.
4. Under Preferred networks if you see any name in the list then highlight the name and click remove.Click OK.
5. Right-click on the wireless Network Connection icon and select 'View Available Networks'.
6. Look for the SSID (aka Network Name) of the Wireless router or access point.
4. Highlight the SSID from the list that you want to connect to.
5. Type the security Key here and click on the 'Connect' button.
6. You should have successfully established a wireless network connection.

since the wireless light is not glowing what we can do is we can go ahead and reset the wireless router,
look at the bottom of the router and you will see the routers labelling,check where the reset button is located,it will be on the back where you have the port,use a paper clip or something that is pointed and hold it down for about 30 sec you will see that all the lights will blink on the router,leave the reset button after that power off the router for 60 sec and then power it on....check if the wireless light is on....it shud be on now..
vedhick