Home Logo

Related Topics:

A
Anonymous Posted on Feb 20, 2015

Can you refer me to an Aqua Glass Jacuzzi Bathtub pump motor?

Aqua Glass Jacuzzi Bathtub pump motor. Model #1013039 HP 2.0S Volts 115 1 speed GE Mod # 5KCP111ES003X SER #2WFN V 115 PH 1 HZ 60

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Oct 24, 2008

SOURCE: JACUZZI HOT TUB J365

MOTOR TO HOT TUB KICKS OFF ON HIGH SPEED AND GETS VERY HOT AFTER RUNNING ABOUT 20MINUTES AND STARTS BACK UP IN LESS THAN A MINUTE,BUT CONTINUES TO KICK OUT ,IVE REPLACED THE MOTOR AND STILL SAME PROBLEM..

Ad

Donni Steen

  • 687 Answers
  • Posted on Apr 06, 2009

SOURCE: Hydro maax wirlpool bathtub Model # J6061 Pump will start

Can either be a bad motor or if the motor has a capacitor, it needs to be replaced. I would call a service professional to come out.

Anonymous

  • 123 Answers
  • Posted on Jul 31, 2009

SOURCE: my brand new jacuzzi bathtub motor just clicks and

check 2 things......1) see that the power is connected and that the breaker is on.......2) if everything from 1 is a yes check the hose that runs from the switch to the motor it may be lose, disconnected or has a hole in it. If you have anymore questions just ask. I am a professional plumber for over 25 years

Anonymous

  • 123 Answers
  • Posted on Sep 01, 2009

SOURCE: Does new jacuzzi bathtub nead the heater

Jacuzzi heaters are an addon and are a convnience accessory. They are not required for functionality of the unit. I personnaly do not have a heater in either of mine.


Thx
Deathstalker

jdn4

  • 100 Answers
  • Posted on Feb 14, 2010

SOURCE: whirlpool tub pump only runs in slow speed

give aquaglass a call at 731-632-0911 they will be glad to help you,i worked for them at one time

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Jacuzzi 1.5 hp motor is smaller than the older pump. Is there going to be a problem with it going in to the housing?

if your going form a 2hp no it shouldnt be a problem you just get go up in hp or you have to change the impeller........
0helpful
1answer

Jacuzzi hot tub pump. Put new pump and motor in water wont circulate but can here pump running.

Check your suction plumbing to be sure it is sealed and tight. Then force some water through the pipe to see if anything is blocking it.
0helpful
1answer

How do you get the pump out of the housing on a jucuzzi magnum force pump

If yours is the model with the big round ring around motor, it is a large retaining nut. Remove this nut and the motor should come from the pump housing. Don't be too rough, plastic breaks.
0helpful
1answer

Can you tell me what kind of torque a 1 1/8 hp 115 ac ge motor has?

Thank you for posting your question here on Fixya.com.

Not a GE but the numbers should be very close...

Load (% of horsepower) Torque (OZ-FT)
0.25 7.0
0.5 12.0
0.75 18.0
1.0 24.2
1.25 36.6

I believe what you meant was that you have a 2 speed, 1 HP high, 1/8 HP low motor…these numbers are for the high speed.

If this answer does not fix your problem, please comment with additional details prior to rating the answer. Positive feedback is appreciated once your problem is solved!

John
0helpful
1answer

Whirlpool tub pump only runs in slow speed

give aquaglass a call at 731-632-0911 they will be glad to help you,i worked for them at one time
0helpful
2answers

Motor turns on then off.impeller turns freely?

More info needed ... the impeller should turn freely when in the off position, both directions. If it is running backward when it is off, there is air in your filter causing back pressure. OR, (let me ask) is there another pump on this circuit? Fix your air leaks. Be careful when starting the pump ... if the air pressure is running the pump backward when you turn it on, you will DEFINITELY spin the center out of the impeller.

It could be that you spun the center out of the impeller if you are not pumping when the power is on.

Have you disassembled the device yet?

Tell me more.

Thanks for your interst in FixYa.com

Please vote

a

PS: I am a CPO (Certified Pool Operator) and I maintain three public pools.
1helpful
1answer

Jacuzzi pump not pumping

I would probably say that the pump is clogged up or frozen. The motor humms until the heat sensor clicks it off. Try taking apart the front of pump and see if it turns and you should see the problem. Parts are available at most pool stores. Pumps are usually cheaper online.
Not finding what you are looking for?

213 views

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Gene Lawson

Level 2 Expert

53 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...