How do I take Canon imageCLASS D320 All-In-One Laser Printer off from "paused" status?

Try using a better quality paper (heavier paper). Also give the paper some air before using.

I use to have an HP All-In-One Laser Jet printer that, for reasons unknown to me, wouldn't print after clearing a paper jam until I replaced the ink cartridge.

According to the canon website this printer only has drivers for PCs.

Hello,
E100 is error for laser unit.
Probably the jam occured because fault on laser unit. To fix error you need to reconnect all connectors of laser unit, or in worst case replace laser unit completly.

Call service...

Hope that helps!

First you have to know the position of the paper that has jamed.
the cardinal thing to do is to loosen and open doors that must be opened in order to have a clear view of the paper.
How to open see the marks on the machine. Mainly the paper jams between the drum and the fuser, so make sure you see any green nobs meant for seperating the presssure roller and the upper roller so that the paper is free to move out in case it jamed between the fixing rollers.
See the manual on how to remove paper jams.

Hi

Read my paperjam guide on this page
http://www.fixya.com/support/r2313244-paper_jam

go to: www.driverguide.com
its free to join and they will almost certainly have the drivers you need.

Hi Dfra. Here is the link that show "how to clear jams"
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=124&modelid=10517#SupportDetailAct

Good luck.

The paper size selected in the menu system must match the paper size in the rec. (recording) paper tray. If you have 'letter' size paper in the tray and the menu system is set for 'A4' paper you will get this message. Either put A4 size paper in the tray, or change the paper size in the menu system to 'letter'.

Mine will download( to d/l folder) & install but does not show up on printer list. help!!