I need to oil my Janome EZY LOCK 304D overlocker but have lost my manual. Can anyone help, please

Replace the needle then rethread in order: upper looper, lower looper, right needle, left needle

here is a link to one that is for a small investment in adobe pdf format

try these links for the part

http://www.ebay.co.uk/itm/JANOME-OVERLOCKER-KNIFE-BLADE-UPPER-103-434D-234D-etc-/280899155711?pt=UK_CraftsCollect_SewingMachines_RL&hash=item4166e4f6ff

http://www.ebay.co.uk/itm/JANOME-OVERLOCKER-KNIFE-BLADE-LOWER-103-334D-134D-234D-304D-203-104-etc-/270833593318?pt=UK_CraftsCollect_SewingMachines_RL&hash=item3f0ef0abe6

sewingpartsonline.com
sew4less.com

It doesn't look like there is anywhere to get this manual for free. But you can buy it for $15 from a website.

http://www.sewshop.com/Janome_Sewing_Manual_304D_PDF____-8-4312-8710.html

The Janome website do partial manuals for some machines.
They have manuals for the MyLock 644D,and for the MyLock 634D
They should be similar enough to your machine .

how to thread the 404D Janome, lost booklet with instructions

www.janomestuff.com answer it all

The easiest way to remember them is to observe the machine while you turn the handwheel and see. If it rubs put a drop of oil on it.This means on the end of each shaft, on parts which slide; any place which has a friction point. NOT on the knife blades.
sewman7

Although the tension units on your machine are of a different configuration, always thread from the right spool first and then each one to the left.........ONLY in that sequence !


now take a look at this sewusa site for a better view of the actual routine through the thread guides.........as I say, the tension units are different, but the sequence is the same, just use the image from above to see which one is next........this chart, just as the one on the fold down cover of your machine need to be followed one thread at a time from R to L

If you want any more help with this, just post back here, or, drop a line through the "Contact Us" page at www.bargainbox.com.au