How to install konika minolta with computer

Do you have access to scan to that location input you PIN and password properly.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Is the start button lite orange? Contrast control work ? Look at getting a new control panel worse case the printer control board is bad.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Its very demanding and rare.Hard to find.

select you tube and ask how to set ip address for konicaminolta di 2510

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

s it a shared printer? if it is, install the driver as a local printer

Have you been able to do this before? If so I would make sure your ether net cable is good or change the cable with a new one. Also,has any up dates been done to you network? If so, have your "IT" person put it back to how it set up before. Lastly, do you have the software loaded on your computers?

hello,

you have to install konica minolta c252 driver and software application. c252 adn c 250 are similar model.

You can download it (for windows vista) to konica minolta web site.

Bye

Check if it's online in the Server, o a scan and print. The check the sharing status - is it shared ?

CDC##  Appears to be trouble related to security.
The only solution is to contact Konica Minolta to find out what needs to be done to resolve the problem. 
That is only solution the service manual has provided.

You will need to go to the printers folder under Start, settings, & select the C252, right click on it, select properties & go to the 'Option' tab.
In here input the C252's IP address into the 'printer name or IP address' field and select gather option information.
Once done you will need to apply the settings and ok.
If you dont know the IP address you can get it by going into Utility, user settings, print reports, config page.
You should now be able to select the correct trays without errors.

Hope this Helps.