How many square feet will it heat - Dyson Inc Am05 Hot Cool Fan Heater - 300095-01

feet X feet = square feet
That's it.

Width x length ie 12 feet wide by 12 feet long = 144 square feet

First, we need to determine the number of square units in the Imperial system. We can choose to do the calculation in feet or inches.

Let's do it in inches first. There are 12" in a foot, so we multiply 90,000 by 12 to get 1,080,000 linear inches. Multiplying this by 41.3", we get 44,604,000 square inches. We can convert this to square feet by dividing the number of square feet by the square inches in a square foot. Since a square foot is one foot by one foot, or 12 inches by 12 inches, there are 144 square inches in a square foot. Dividing our previous answer by 144 will give us 309,750 square feet.

Converting to square metres. An inch is defined as 2.54 centimetres ("cm"). Thus, there are 2.54cm x 2.54cm in a square inch or 6.4516cm^2 in a square inch.

Using the 44,604,000 square inches we got above, and multiplying this by 6.4516, we get 287,767,166.4 square cm. There are 100 cm in a metre, so there are 100cm x 100cm in a square metre. So there are 10,000 square centimetres in a square metre. I get 28,776.7 square metres.

There are 3.280839895 feet in a metre. So there are 3.280839895 x 3.280839895, or 10.76391042 square feet in a square metre. Taking 309,750 square feet and dividing by the 10.76391042 we get 28,776.7 square metres.

Good luck.

Paul

Measure the length and width of the room (in feet) then just multiply the two numbers to give square feet.

There are several ways to do this.
We can choose either inches or feet as our base.
Let's do the case in inches.
Let's say the measurements are 5'2" by 2'4".
Step 1 - Convert everything into inches, so multiply the feet by 12 and add the inches. 5'2" becomes 5x12+2 = 62". Similarly, with 2'4" 2x12+4 = 28".
Step 2 - Calculate the area in square inches. 62" x 28" = 1736 square inches.
Step 3 - Convert square inches into square feet by dividing the number of square inches by 144 (12" x 12"). I get 12.06 square feet.

Let do the case in feet using the same measurements.
Step 1 - convert everything into feet. Since there are 12" in a foot, divide the inches by 12 and add to the feet. 5'2" becomes 5 + 2/12 = 5.16'. Similarly, 2'4" becomes 2 + 4/12 = 2.33'.
Step 2 - calculate the area in square feet. 5.16' x 2.33' = 12.02 square feet.
Step 3 - Convert the square feet to square inches by multiplying the answer in square feet by the number of square inches in a square foot (144). Imagine a square 12" by 12". 12.02 square feet x 144 = 1730 square inches.

Note that I have rounded my answers, thus, they are not equal. To avoid this, keep the answer in your calculator and round only at the end.

Any questions, let me know.

Good luck.

Paul

a cubic foot is a 12inch by 12inch square by 12inch depth its like stacking 1500 little sq. boxes in a room or two.a 12ft by12ft room with 8ft walls would hold 1152 cubic feet or little boxes.so in comparison 1500cu ft is little more than one room,1000sqft is a small house.

That depends on the length and width.
24 feet 11 inches by 1 inch is about 2.01 square feet.
24 feet by 1 feet is 25 square feet.
20 feet by 5 feet is 100 square feet.
12.5 feet by 12.5 feet is 156.25 square feet.

Since "square feet" is a measure of area, the area of 350 square feet is 350 square feet.

Or are you asking for the the largest area you can fence off with 350 feet of fencing? With 350 feet of fence material, you could enclose a square 87.5 feet on a side with an area of 7656.25 square feet. Alternatively you could enclose a circular area of a bit more than 9748.24 square feet.

Simply square the conversion factor between feet and metres to get the conversion factor between square feet and square metres.

One foot is 0.3048 metres, so squaring that gives one square foot is 0.09290304 square metres.

The square foot is the smaller unit of area, so you will have to divide a measurement in square feet by the number of square feet per square meter. Since there are 10.76 square feet per square meter, divide by that value.

Obviously, to convert from square meters to square feet, you would multiply by that value.

1 square meter is 10.76391 square feet.