How do I turn on the sail trail on my GPS?

Resetting will not delete tracks - you must delete the track(s) individually. Your manual is here. Turn to page 26 and read "Using Tracks" to learn how to delete them.

Good luck!

tomtom is not designed for marine use and there is no fix possible

Hello, in order for the humidifier to turn on and off with the furnace you need either a sail switch or current sensing relay. A sail switch mounts in the return air duct and senses the return air when the furnace turns on thus turning on the humidifier and turning it off when the airflow stops. A current sensing relay works the same way but instaed of sensing airflow in senses current on the blower motors common lead and is easier to install than a sail switch. I will post a pic of both

Sail switch



Current sensing relay

Please download the latest manual on the T400 and refer to the section on Vertical Profiling.

Check the shift interlock, it is designed to keep the vehical in park until the brake is depressed. Try turning the steering wheel (both ways if necessary) as you turn key to remove it

Hello :

I recommend you to reset your device to fix the problem .

Here is how to reset your GPS :

1. Turn unit OFF
2. Press and hold the PAGES key
3. Press and hold the PWR key
4. Release both buttons when the USA map appears
..........................................................................................

Here is how to hard reset your GPS . But be careful because Hard Reset (Deletes stored GPS Data such as Waypoints and trails)

1. Turn unit OFF
2. Press and hold the ZIN&ZOUT Keys at the same time
3. Press and hold the PWR key
4. Release both buttons when the USA map appears

PLEASE DON'T FORGET TO RATE !

Hi there Roofer,

While that is all possible, in order to do it you would need to trace the cab either by the cab number or the drivers name and company.

If you already have this information (from the video), the best advice I can give you is call the police or animal control and make out a report. Then the GPS tracking records will corroborate your claims.

You may get better results with animal control. (BTW Animal control officers have authority to arrest). The tape you have will prove the charge.

Just don't let up, tell them you ARE pressing charges. With the evidence you have, what more could they need.

Best of luck to you
Mike

Thanks Marty for the info on the sail switch. We experience the same error code 43 problem. Seemed like the sail switch was stuck in the back position and didn't come forward when the fan started. So I bent a metal coat hanger and used it to pull the switch foward to "unstick" it. I tested the oven turning it on and off a few times and made sure that the switch moves forward with the blower fan starting when the oven was on, and moved back when the oven was turned off. Should be obvious, but make sure the blower is not running and the oven is turned off before you stick the wire hanger back there. A pretty quick and easy thing to try before calling the repairman.

Check your settings. Menu>My Trails>Trail Options>Update Trail. If you uncheck the Update Trail option, automatic trail
creation will be turned off. This must be check to record and track.

Triton72

Where are you?